- Messages
- 10,034
Sorry best, I didn't think about the squeamish members of the forum when posting that
I will never look at a Stanley knife again without being reminded of your posts.
- Thread starter Zozi
- Start date
- Replies 35
- Views 4K
- course gas gas course
Discuss How Do I Get Buff For My Gas Course in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I will never look at a Stanley knife again without being reminded of your posts.
Reply to How Do I Get Buff For My Gas Course in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi,
I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two?
Cheers,
Peter
Hi all
Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
-
-
-
-
-
Sewer pipe problems not sure about it
- Started by sammie81116
- Replies: 3
-
-
-
-
My son has an Apprentice interview- please help.
- Started by LadsDad
- Replies: 3
-
-
-
UK Can't get stopcock 100% closed to allow a tap repair
- Started by DIY disaster
- Replies: 1
-
-