Search the forum,

Honeywell ST6400C programmer Honeywell T6360B1028 Room thermostat fix

Post new thread

Discuss Honeywell ST6400C programmer Honeywell T6360B1028 Room thermostat fix in the Central Heating Forum area at PlumbersForums.net

M

MkLondon

I have a Honeywell 7 Day Electronic 2 Channel Programmer ST6400C programmer and a Honeywell T6360B1028 Room thermostat . My programming is on the on position. I turn my thermostat off. But it turns on after 10 mins . How do I fix this?
 

Reply to Honeywell ST6400C programmer Honeywell T6360B1028 Room thermostat fix in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
127
Lou
Lou
C
Greenstar Boiler Not Working
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
1
Views
140
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
257
oz-plumber
O
R
squeaky grohe bathroom tap 2 months old
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
91
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice
TilersForums.co.uk
Tilers Forum
Tilers Forum
Tiling Advice Live
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock