1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discuss Hinge unit on the R40 G5 in the Oil and Solid Fuel Forum area at UKPlumbersForums.co.uk.

Tags:
  1. MikeJhn

    MikeJhn Active Member

    Any one use the hinge unit on the Riello R40? just wondered how useful it was? :Heating Spare Parts would save putting the burner on the boiler house floor.
     
  2. Best

    Best Trusted Plumber

    Yes. It used to be supplied with the burner on the larger new Warmflow boilers years ago.
    I find it quite handy if you have space to left and right of burner to manover the burner about.
    The hinge can be a bit stiff though.
     
  3. Tea-Break

    Tea-Break Member

    Have also used them on large sectional boilers.
    Serviced a wall mounted external Camray 5 today, which
    Have a similar hinged support for the RDB.
    Excellent idea, makes service easy.
     
  4. MikeJhn

    MikeJhn Active Member

    Thanks guys, may have to get a couple for the two units I service now days.
     
  5. MikeJhn

    MikeJhn Active Member

    Just a heads up, these hinge units do not fit if the back/black casing of the R40 is in place, taking it off makes a nonsense of any FGA readings previously obtained.
     
Loading...
Similar Threads - Hinge unit Forum Date
What to use to seal cut edge of vanity unit. Bathrooms, Showers and Wetrooms Jun 2, 2019
Asbestos in warm air unit being removed?? Gas Safe Registered Plumbers Only May 15, 2019