Search the forum,

Hilti 15.6V drill driver with two batteries and charger

Discuss Hilti 15.6V drill driver with two batteries and charger in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

WHPES

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,835
As in title, one battery very good, the other fairly good but wont hold as much charge as the first. Drill in very good condition. Overall good cosmetic condition and well looked after. Includes carry case and charger £100 ono
 
Status
Not open for further replies.

Reply to Hilti 15.6V drill driver with two batteries and charger in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

E
Odd Vitodens 200W Combi symptoms, fan spins up 100%, even in standby
Conditions: nearly 10 year old boiler WB2B, heating mode off, DHW on or also in standby, Boiler shows no fault LED on, no new fault logged, room thermostat deactivated. Boiler gets odd attacks of suddenly turning on the fan 100%, then (gas valve and ignition are clicking?) potentially tries to...
Replies
0
Views
378
Edelweiss
E
D
Soldering poorly fitting joint - pipe not round, good fill, how?
Hi, Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with elbows), the last cm before the open end is pretty much straight, but as a result of the bend it is not perfectly round. I mean it is pretty much...
Replies
14
Views
988
gmartine
gmartine
U
    • Winner
    • Like
Replace stop-tap/stopcock
Hi all, I joined today and am a newbie at plumbing DIY. Thought I'd share my experience replacing the stopcock under my sink. The old one looked very corroded around the tap handle. An Anglian Water engineer was at the property measuring my water pressure and flow rate. When he saw the...
Replies
1
Views
514
Lou
Lou
Gilbbb92
Baxi 630i Error E133 Urgent Help
Good afternoon Guy's & Girl's, So I have a Baxi 630i that is showing a e133 fault. Upon hours of extensive research it is an ignition fault that can be caused by numerous of issues. One being that the condensate pipe is frozen, given the current weather and climate I edged my bets on this...
Replies
21
Views
3K
ShaunCorbs
ShaunCorbs
B
Cold Rad's & return cool on another rad
Sorry I have sort of asked this before, tried professionals but not great 1st experience hence DIY attempt attempt again. 2 completely cold rad's, another one get pretty warm, flow pipe hot, return v.luke warm. (Both rad's I have manually flushed really well) Hot water works fine, boiler return...
Replies
3
Views
632
Ric2013
R
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock