Search the forum,

Help on removing GloWorm Ultimate 40 CF open flued boiler

Discuss Help on removing GloWorm Ultimate 40 CF open flued boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

ckyens

Hello all.

Im in the process of planning to upgrade the boiler in the house, doing the job on my own.

Its currently an old radiator system & old open flued GloWorm Ultimate 40 CF housed in a fireplace fitted back in 1993.

(I presume at one point there would have been a back boiler in there as the remnants of lead pipes are visible)

Has anyone removed one of these or similar boilers from fireplace and the adjoining water cylinder and header tanks in the attic?

Any tips would be welcome.

(And yes I am gas safe registered)
 
One more post and you can join our gas Safe only section.
 
Thread closed until you are.

When you get your yellow badge up I will be only too happy to move and reopen it for you.
 
Status
Not open for further replies.

Reply to Help on removing GloWorm Ultimate 40 CF open flued boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Oil Boiler and System upgrade
Hi All, We have finally decided after a bit of a persuasion to have installed a utility room in our garage that currently houses our oil boiler. Initially we thought the boiler may stay in place but after discussions with the builder we would have to move the boiler to replace the floor and...
Replies
7
Views
825
Type2jim
T
P
Worcester Greenstar Boiler flu position conform?
Hi everyone, I have searched on the forum and read many of existing thread however I am not still confident I found all info for my personal case, if someone could help. I am in the process of buying a house and the surveyor identified that the boiler flu might be too close to a opening...
Replies
7
Views
1K
Last Plumber
Last Plumber
B
What is the problem with my oil central heating system?
Context for issue: Last winter the temperature switch on my boiler shorted somehow, the boiler was then running WAY too hot and ended up blowing/melting a hole in one of the pipes. I repaired this by putting in a new stretch of pipe in and just connecting it to the existing pipes with two...
Replies
6
Views
552
Butchy10
B
B
What is the problem with my central heating system?
Context for issue: I'd like to start by saying I'd rather not read 100 "Hire a professional comments", I will do that when/if it comes to it, but I'd like to do it myself if possible. All images for system here: https://*********/a/ngPQkre Last winter the temperature switch on my boiler...
Replies
0
Views
342
Butchy10
B
J
Condensing oil boiler downsize
Hi All, My home is 2 storey - split into 2no zones. 14 rads downstairs and 7 upstairs. Open vent system standard boiler. Hot water is immersion heater. The old boiler was a worchester bosch dansmoor rated at 26-32kw. Nozzle spec was 1.0 gph. However the enginer had 0.85gph nozzle in it. It...
Replies
17
Views
2K
JC22024
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock