1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discuss help identifying this bath/shower mixer in the Valves & Taps area at UKPlumbersForums.co.uk.

  1. Robert Brady

    Robert Brady New Member

    Hello,

    this is my first post on here.
    i am trying to stop water weeping from the temperature control side handle of this tap.
    I am going to replace the o rings but can't see any markings on the taps to identify them. i contacted grohe because i thought it looked like a sentosa but grohe say it's not theirs. any help would be greatly appreciated.
    if i can't match the o rings with new ones would wrapping ptfe round the existing rings be a decent fix?

    thanks ,
    Rob tap 2.jpg tap 1.jpg tap 2.jpg tap 1.jpg
     
  2. rpm

    rpm Trusted Plumber Top Contributor!!

    Guess you could send photos to the shower doc and see what they say and ptfe under the O-ring might be a short term fix.
     
    • Like Like x 1
  3. Robert Brady

    Robert Brady New Member

    Thanks rpm i have just sent it over to them!
     
    • Like Like x 1
Loading...
Similar Threads - help identifying bath Forum Date
Help identifying tap valve Valves & Taps Jun 8, 2019
Help identifying a toilet cistern filler valve? Plumbing Forum Jun 2, 2019