Search the forum,

Discuss grant combi v3 heating problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

swift

hi guys

ive got a grant combi v3 with low heat from hot water. central heating naturally convecting all the time. ive replaced the microswitch and the diverter valve, the hot water now is lovely and hot but after you have switched the hot tap off the central heating is naturally convecting heating up the rads. have checked with voltage pen that the microswitch is getting power. i have looked through the manufactures instructions on troubleshooting but nothing in there to do with this problem. any of you guys can shed any light on this problem?
 
Status
Not open for further replies.

Reply to grant combi v3 heating problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

My Grant combi oil boiler is giving me quite a headache at the moment. When I returned home last Friday I'd no heating or hot water. An engineer called the next day and diagnosed a faulty pressure switch. This was changed and everything seemed ok. However then the boiler began to lose pressure...
Replies
3
Views
525
So a strange conundrum regarding water temp if anyone can help resolve, would be much appreciated. Ive tried to give as much info as possible to give a full picture but let me know if ive missed anything. I have a Baxi Avanta 25h heat only boiler. Works fine. Unvented 300ltr megaflow. Stated...
Replies
1
Views
147
My first thought when I heard this fault a combi boiler with hot water but no heating. Was a problem with the stat, controls not making the call for heat. If this is not the case. Can the divertor valve be the cause of the issue?
Replies
0
Views
334
Hello, I am looking for a heating engineer to diagnose and resolve an issue with my Vaillant EcoTec 832 combi boiler. Job Location: Copeland Rd, London. Job Description: Problem: The boiler is not providing heating under normal conditions, although hot water supply is fine. Interestingly...
Replies
1
Views
386
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and plasterboard celling. I have got unvented pressurized RM Cylinders hot water system with 27KW Worchester gas boiler with expansion vessels . When...
Replies
2
Views
449
losing pressure
L
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock