Search the forum,

Discuss Gas Safe Engineers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
My mother has got a problem with her boiler its sounds like there's something turning around in the in side of it and sounds like this tick tick tick when its turning does it sound something major thanks
 
Hi chaps, has anyone come across a boiler installation in one property but the flue termination in next doors property, i don't mean terminates across a boundary i mean the whole boiler flue is across the fence in another property
 
Hi chaps, has anyone come across a boiler installation in one property but the flue termination in next doors property, i don't mean terminates across a boundary i mean the whole boiler flue is across the fence in another property
 
you would think so , but the building inside goes beyond the boundary and the boiler is in a cupboard which is on the other side of the fence, very strange.in my estimation this is a no no and would have to be rectified as the fence boundary can't be moved. any thoughts
 
they'd be made to move it if neighbor complained and building control got wind i would have thought. not sure its particularly actionable if not.
 
so i would imagine its more of a building regs situation than a gas safe one ?
 
hi croppie i have sent my photos off the back and front of my card but i have not heard from yourselfes as yet ? is this done ones a month whating two be reconized told you about the spalling before sorry
 
Both forums confuse me but then again I'm new to all this. I'm up for anything that lets me tell them apart.
 
Please be very aware that this is an open forum.

Please take ALL gas related threads where you are discussing the technical and safety related repair of boilers into the Gas Safe Registered Engineers Sub Forum!

Thank you!
would be nice to find this gas safe forum;)
 
Status
Not open for further replies.

Reply to Gas Safe Engineers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
59
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
203
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
197
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock