Search the forum,

Discuss gas fitters in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

tiling spread

gas fiter needed for work in gillingham kent starting soon
dont know it if it helps but the gas spec is for a take away
please pm with your number if you up for it
 
Thanks for posting your requirement for a gas fitter on the forums,tiling spread,anyone interested,as said,please send pm

If possible,please post when position filled
 
will do m8 thanks think it needs a total over hall ew bolier
 
What do you require? Domestic Boiler? Commercial Catering equipment? for NG
 
Status
Not open for further replies.

Reply to gas fitters in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
173
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
118
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock