Engineer needed to install system boiler + unvented cylinder - Hertfordshire

[rjmeer]

Hi,

I'm looking to replace my vented system with a Vaillant unvented set up. The work will require installation of the following components:
- Vaillant Ecotec 630 (ERP) system boiler with standard horizontal flue kit
- Vaillant Unistor 210 unvented cylinder
- Vaillant VR 66 control centre
- Vailltant VRC 470 weather compensating control
- Vaillant VR 10 NTC temperature sensor (into dry pocket within Unistor 210)
- Megaflow 2XP


Schedule of works:


1. Existing boiler (Potterton Kingfisher 2 CF100) , vented cyclinders (x3), cold feed tanks (x3 in loft) and F&E tank (in loft) to be decommissioned and removed.
2. System to be powerflushed
3. Installation of boiler and unvented cylinder within utility room. This is where the existing boiler is situated and is adjacent to the gas and water mains.
4. Installation of controls and Magnaclean


Vaillant approved installers preferred and evidence of G3 certification will be required. Property is within the Stevenage area of Hertfordshire.


Feel free to get in touch if anyone is interested

Thanks

Rumman

 

[ShaunCorbs]

any reason whys there 3 cylinders already installed (big house) ????

 

[Destroyer2813]

Where abouts in Stevenage ?

 

[Chalked]

I take it you have already bought the boiler !

 

[Destroyer2813]

I take it you have already bought the boiler !

Possibly according to rated people post or will consider a supply and fit price

 

[Dotty]

Thanks for the opportunity. If this job interests you please PM the op direct.