Search the forum,

Discuss Correct height of towel radiator above floor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
26
Hello,

Just doing first fix pipework for a bathroom and two ensuites.

Just wondering what the convention for height above floor for towel radiators is please?

I will be bringing two chrome pipes out of the stud wall at the correct height for angle valves.
I am also putting extra timber noggins in the stud wall to screw the radiators hence have to know the height at this stage.

I have seen 300mm above finished floor but this seems a bit low for towels.

Cheers!
 
And low enough If it’s some bonkers tall one
 
Ok chaps cheers.

I will go for 300mm pipe centres above the floor, should be ok and I can always put an elbow and a short pipe if it's too low.
 

Reply to Correct height of towel radiator above floor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock