Search the forum,

Discuss Brain Teasers - which one will fill first? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Dan

Administrator
Staff member
Admin
Messages
2,782
65195-4bbff3c3dc9fd393654e32eaca51fbb9.gif
 
F, 3 and I have no idea, so I will say the same.
Nice to hear from you though @Dan

Edit due to being an idiot and not looking at the diagram properly
 
Last edited:
edit, - I had another look and nearly reversed my answer!
So much can be missed! :p
 
G and 4 if the tap is running slowly, A and 1 if it is running fast. Slightly down on the left due to the weight of the thread and the ping-pong ball although the question setter probably intended these to be negligible, in which case no change.
 
Status
Not open for further replies.

Reply to Brain Teasers - which one will fill first? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
245
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
202
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
223
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock