Search the forum,

Discuss Biasi Riva he mk2 faulty in the Plumbing Jobs | The Job-board area at PlumbersForums.net

O

Old Account

hi everyone,

Does anyone know why the boiler ignites in heating mode and goes every few seconds off again until goes into a lockout?

Hot water works fine.

I am not familiar with those boilers would appreciate a little help. I just changed a hob there and purged the system 1h later the boiler doesn’t work in heating mode just ignites shortly and goes off again.

Any idea what it could be?
No ch filter installed nothing really poor installation.

Kind regards
Ron
 
Try changing the ch sensor.

If your burner pressures are ok. And make sure it’s switching over to ch mode.
I recently changed a new cartridge and actuator head. It’s just funny as hot water works fine though only in heating mode it goes on for about 2 seconds and goes off again.

I shall check today the burner pressure and ch sensor thank you AMG!!!!
 

Reply to Biasi Riva he mk2 faulty in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock