Search the forum,

Discuss baxi genesis in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

cod

The boiler delivers hot water and central heating, but the pump runs on continuously after hot water demand ceases (the boiler is in water only mode)
 
Last edited by a moderator:
Cod,
Did you solve this problem - I have the same issue with a Baxi Genesis 80 but it only happens when switched to HW/CH, its ok when in HW only. Cheers

John
 
You require a gas safe engineer. This forum no longer provides boiler repair advice on the open forum.
 
Status
Not open for further replies.

Reply to baxi genesis in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

So a strange conundrum regarding water temp if anyone can help resolve, would be much appreciated. Ive tried to give as much info as possible to give a full picture but let me know if ive missed anything. I have a Baxi Avanta 25h heat only boiler. Works fine. Unvented 300ltr megaflow. Stated...
Replies
1
Views
151
  • Question
Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always amazed at the water pressure so on the odd occasion that the water was only luke warm it was easily forgiven, but over time we have come to realise that...
Replies
8
Views
386
My son has just had a new boiler fitted and hes noticed that the pump runs 24x7 even when both the heating and hot water are set to off. He’s also found that when the hot water is set to off on the programe timer, the boiler is still heating up water. I wonder if this is because the engineer...
Replies
3
Views
351
M
Hello, We’ve recently moved into a fairly old, fairly big detached house (i.e. fairly draughty, but not too bad by any means) with a fairly new well maintained Worcester combi boiler. We weren’t convinced the heating was working right and then got hit with a £610 energy bill for the first 6...
Replies
0
Views
256
MartinPod81
M
When I put the central heating on the hot water gets drawn through the pump but is then being diverted straight back to the boiler instead of the rads What is this, and how likely is it that it is faulty? That sits in between the hot water to the rads and hot water to the hot water tank...
Replies
3
Views
392
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock