Search the forum,

Discuss baxi burmuda 401 spares in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Billy Bob Bob

wanted rear combustion box insulation panels reply on here or pm me with details these are now obcerleate but please no stupid prices i will modify burmuda 552 panels to fit
 
good reason to tell the customer they need a new boiler normally !!!!
 
we used to buy insulation panels in 600 x 400 panels and cut them down to size, check with baxi to see if they will allow it, have you checked with baxi for availability (or is that where the stupid price came from?)
 
yes even baxi tech were surprised they were no longer available,they said they cant condone modifying a 552 panel but cant see anything wrong with it either,at the end of the day yes i could condem 2x good condition 401 burmudas but why? the landlord cant afford to replace and its only cracked and broken panels causing the problem and they will outlive any combi
 
worth checking parts center, ive got obsolete parts thro them that others have failed to provide in the past
 
Status
Not open for further replies.

Reply to baxi burmuda 401 spares in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
185
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
773
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
61
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock