Search the forum,

Bath/shower with no hot water

Post new thread

Discuss Bath/shower with no hot water in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

R

razUor223W3E44

Messages
1
Hello,

We hade a problem with our hot water not working in one of our bathroom's (all other outlets were working)

Therefore we got the Thermostatic Shower Valve changed and everything was working again.

However a few days later, both hot and cold no longer works for the bath and the hot water has stopped working for the shower.

Do you have any idea what the problem could be? Thank you in advance.
 

Reply to Bath/shower with no hot water in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
137
Lou
Lou
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
337
Chuck
C
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
129
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum UK
Tile News
TilersForums.co.uk
Electrical Advice | Electricians Blog
Electrical News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock