Discuss Banging noise from Glow-worm boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

This boiler is about 7 years old, property is about 15-20 years old, flow and return are 22mm and two pipe system, combi boiler replaced system boiler in kitchen, cylinder removed from bedroom, old pump/valves removed and pipes connected, drop fed system in 10mm hep.
 
10mm systems can sometimes struggle to get rid of heat. Have you got all radiators on? You’re best off maintaining flow through system by have rad valves open to at least 3, then relying on the room stat to bring the boiler on and off.
Also, Set the flow temp on the boiler to 60 degrees. Make sure all isolation valves under the boiler and on magnetic filter are fully open. All things you can do yourself without getting too invasive.
 

Reply to Banging noise from Glow-worm boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
286
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
225
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock