Search the forum,

Discuss Air separators ( first experience ) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

JTplumbingservices

Gas Engineer
Messages
234
Hi lads/ladies.
I came across my first air separator today on an open vented S plan system.
As I’m not clued up on them I was hoping someone could educate me a bit on how they work and where they fit into a system?
This seemed to be between the boiler and pump on the flow with the cold feed coming into it and vent coming off it.
Is this correct ?
Cheers
 
Air-Separator-Installation-Details.jpg


they like to block up and first port of call if the system wont re fill and waters in the f and e tank
 
and normally find them on low head systems
 

Reply to Air separators ( first experience ) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock