Search the forum,

Discuss Advice on whole of house pumps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Dazzlepad

I am installing an ensuite shower room on the 1st floor and need to pump the hot and cold water. The main bathroom is on the ground floor, cold water tank in the loft and hot water tank on the ground floor. I would be grateful for any advice on makes and models of suitable pumps and the best place to position it and how best to connect it. Many thanks.
 
salamander esp pumps
stuart turner monsoon pumps. will all do whole house
 
Status
Not open for further replies.

Reply to Advice on whole of house pumps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
154
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock