You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
valiant
The Valiant Brothers were a professional wrestling tag team of storyline brothers "Handsome" Jimmy Valiant, "Luscious" Johnny Valiant, and "Gentleman" Jerry Valiant. The team wrestled for the National Wrestling Alliance (NWA), the World Wide Wrestling Federation / World Wrestling Federation (WWWF/WWF) and the World Wrestling Association (WWA).
Hi Guys,
The valves on both sides of my Valiant 837 filling loop are letting through causing a constant pressure rise (seems to be a common problem). I want to cap off or isolate the small connector but its not a size I recognise, the part number for the filling loop is 0020010293. Can someone...
A couple of weeks ago my Valiant Ecotech Plus 637 displayed Error F76. Boiler is 13 years old; serviced annually.
I power cycled the boiler and it operated for ~10 days before hitting the same error again; I once again power cycled the boiler and it was in operation for ~24 hours before...
Evening all.. can anyone help me please?? :) today I cut & reconnected both the hot and cold feeds in the kitchen due to new position of sink. Ive capped off the feeds with push fit until the sink arrive ie no tap is connected/not pulled water through yet. Mains pressure back on, but got...
Good afternoon. I am hoping someone may be able to help with an issue I have on a Valiant Ecotec Plus 938 boiler. Fitted approx 4 years ago, the boiler has been suffering from the loss of pressure on the system (down to 0) at least once a day, typically when it is not in use. I have so far;
1...
Can someone help me understand what could be causing this fault?
It only seems to happen when the pressure in the boiler drops below around 1.5 - 1.7 bars otherwise it works fine.
The boiler is a Valiant Eco fit pure 835 and the building is a 3 storey house with 10 radiators.
Thanks
Hi, I have a 20yr+ old Vaillant Turbomax VUW 282 with a magaclean (on the flow side) and connected to Hive system for a 4 bed house.
Had it serviced by British Gas engineers - but its a mixed bunch that come around and often depends on the engineer quality.
Recently had its diverter valve...
Hi All,
I trying to understand some settings or the way circulation pumps work.
I recently had my Vaillant ecoTEC plus 637 fitted in my loft with a megaflo tempest tank. To control it all I'm using a sesoComfort wifi device or the app.
Now there are settings for planning CH and DHW. There is...
Hey!
I'm having a bit of trouble with my boiler. I was hoping that someone could help!
Error F22 is displaying and I need to increase the pressure. I've tried this but I'm having a bit of trouble. My understanding is that I need to move both valves in a direction that results in water flowing...
My daughter is having a kitchen extension and the boiler is going to be fitted on an inside wall with the flu running around 20 feet along the top of her new kitchen cupboards and out the wall. I think it’s a normal combi boiler (maybe Valiant).
Is this normal and are there any safety...
Hi all,
Looking for some advice on a new Valiant Ecotec Plus 615 boiler, fitted a few weeks ago. It makes an on/off vibration shown in the video link below, and is loud enough for me to hear easily in the living room (I live in a 2 bedroom apartment and my boiler is in the bedroom). Our old...
Evening all,
My EcoTec 831 has begun to make a strange noise, the plumber suggested bearings in the fan but it's intermittent and goes when rebooting. Can go a good week without it happening and HW and CH working fine. Any Ideas? Thanks in advance. Video is attached.
Arron
I’ve got a Honeywell st9100c and it fizzled and cut out yesterday no lcd screen working so changed it today and still no power in the boiler any suggestions please
Hello All. Hoping you guys can help me out some here please. Valiant boiler combi. Old wiring to timer and boiler removed during rewire. Advice needed on how to wire up boiler to new timer and room stat. Dediciated fused spur for boiler and exisiting 3 core wire from room stat in place. Boiler...
Thanks in advance. I have a valiant EcoTEC whilst the flow temp is set to 70 the heating flow only reaches a max of 45 when heating is demanded. (I can use chimney sweep mode to get to 70) but it means roads are never hot enough to warm house and boiler always on.
does this seem right?? Any ideas
I've just had the boiler fitted and it came with the next controller which is fine. I wanted a manual switch that we were told we could get to add to the boiler. The timeswitch 150. I ordered it and the electrician fitted it but it won't turn the heating on as it should. Is the nest system...
This is connected to a valiant eco pro boiler. Batteries in the thermostat leaked onto the PCB in the thermostat and now not behaving. Can't find a replacement 360f anywhere but not sure I would want to as it is a complex thermostat and because of this I never used it properly. Can I use other...
hi, I’m hoping someone can give some advice. My boiler keeps giving a error message of f75. I have replaced the expansion tank and it has been repressurised but what happens is the boiler will work then the red light comes on with error message the only way the boiler comes on is to send more...
Hi pictures say it all really..
The knob to turn to adjust the temp of heating,(and hot water) just free wheels, and pulls off.
Can I just stick a screw driver or something in and twist?
Is there a way to work out what it's set at?
Is there an easy perm fix?
Thanks
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.