You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
union
The UNION of European Practitioners in Intellectual Property, or UNION-IP, is a European association of practitioners in the field of intellectual property. It was founded in 1961 under the name was "UNION of European Patent Attorneys".
Hello,
New here.
I have some older type single radiators in my home, that I want to keep.
The are supplied by 15mm copper pipe, into the valve, that has a 3/4 union type fitting.
I want to replace these fittings with TRV's and am having difficulties finding a direct replacement.
My floors are...
Hello I am having a massive argument with some guys over whether this is the correct procedure for these fittings. I have always been told (by gas college and gas coaches) that you do not use compression fittings on brass pipe as the olive doesn’t compress into the pipe. It’s not riddor but it...
Hi,
I am replacing some radiators and using new fittings. Most radiator valves now come with a compression interface rather than a union interface to the radiator tail. It seems to me that it would be rather difficult, if not impossible, to remove a radiator at a later date for decorating when...
My custard wants us to put a tall towel rail in his utility room. Single storey extension with a loft directly above. The new (oil) boiler is in the same room. Vented system. F&R go up from the boiler and along the loft.
He wants the towel rail piped from above onto the top of the rad.
I cant...
Hi all.
Recently started on new build which I have done very little of but enjoying none the less (except lack of scrap!!!!)
I will soon be air testing the gas carcasses and will require one of those black male threaded fittings that screws onto the meter union that allows you to test out. I,m...
Hi
I'm wondering where I can buy a gas meter union on a Saturday morning! I don't think Plumb or Pts will do them, perhaps pipe center? Before you ask, yes I'm Gas safe, 563039.
I'm cutting out some old lead gas pipe at a friends house on Sunday, the lead is wiped onto the meter union, so...
Hi Guys,
I'm just coming to the end of a refurb at home, and fitting a new rad in the dining room, but just noticed that the trv and lockshield are 15mm compression type fittings, which means I'll have to drain the whole system down if I need to take the rad off in future, instead of just...
I have a customer with a mobile dog grooming van. The tank she uses to wash the dogs has a union to connect the hose to, the tank is American made. This union looks like a 3/4 thread but it is not quite a 3/4 thread. It looks the same size but the thread is slightly different. This union is...
Apologies if this should be in another forum but been trying to locate a hose union for an outside tap. Usual sizes are 3/4" or 1" but this one is somewhere between the 2 and the usual DIY sheds don't stock what I am looking for. I have both a 3/4" and 1" union, neither fit, one too small the...
patters_uk
Thread
attach
guess
hose
looking
outside
outside tap
size
tap
union
gota boiler swap on monday that requires upgrading of the gas pipe to 28mm for 4 meters.
i already have a 28mm union which is priced in the quote.
but my question is this would it be acceptable to use the existing 22mm union and use a reducer/increaser to go to 28mm and carry on.
it doesnt...
Hi, I am in a bit of a jam, I have an electric hot water and heating 'boiler' that has a pump that requires replacing, the manufacturer initially quoted 90 quid to replace, so I told the client and he told the landlord, happy days - except that the pump is obsolete and the replacement suggested...
Can anyone recommend a plumbers merchant that has them? I have been to pipe centre and parts centre and they don't. Or is it ok to come off the meter with a 22mm union and branch up to 28mm off the 22mm? Right next to the meter?
Dear all,
I tried to replace half meter length of lead pipe with copper pipe this morning, i removed the lead together with two nuts, thought just new copper pipe and two new 22mm nuts and should be easy. then realised that the nut size is slightly bigger than 22mm nut, brought the nuts to BSS...
Hi all
I have a central heating pump with an iron union fitting and I need to connect it to copper tube, can I use a brass fitting or do I need something to counter potential electrolytic action. An inhibitor will be added to the system on completion.
Many thanks
jps
jps
Thread
22mm
28mm
brass
central
central heating
connect
copper
fitting
heating
iron
merchant
plumbers
pump
shape
system
union
valves
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.