Search the forum,

supply pipe

A water supply network or water supply system is a system of engineered hydrologic and hydraulic components that provide water supply. A water supply system typically includes the following:

A drainage basin (see water purification – sources of drinking water)
A raw water collection point (above or below ground) where the water accumulates, such as a lake, a river, or groundwater from an underground aquifer. Raw water may be transferred using uncovered ground-level aqueducts, covered tunnels, or underground water pipes to water purification facilities.
Water purification facilities. Treated water is transferred using water pipes (usually underground).
Water storage facilities such as reservoirs, water tanks, or water towers. Smaller water systems may store the water in cisterns or pressure vessels. Tall buildings may also need to store water locally in pressure vessels in order for the water to reach the upper floors.
Additional water pressurizing components such as pumping stations may need to be situated at the outlet of underground or aboveground reservoirs or cisterns (if gravity flow is impractical).
A pipe network for distribution of water to consumers (which may be private houses or industrial, commercial, or institution establishments) and other usage points (such as fire hydrants)
Connections to the sewers (underground pipes, or aboveground ditches in some developing countries) are generally found downstream of the water consumers, but the sewer system is considered to be a separate system, rather than part of the water supply system.Water supply networks are often run by public utilities of the water industry.

View More On Wikipedia.org
  1. U

    Pros and cons of running boiler gas supply pipe indoors Vs outdoors

    Hi all, Does anyone have any feedback as to which is best. Running the pipe from the outdoor gas meter to a new boiler on an outside wall or run the pipe under the floor (suspended timber) which is our existing setup and the new boiler is being sited in same location as old. I ask just in...
  2. B

    Is 22mm supply pipe always required for combi boilers?

    Hi All, I need your advise as I'm really concerned here. I only just had regular boiler replaced with combi (Vaillant ecoFIT Pure 25kw). I had few surveys done and everyone stated the gas supply pipe from the meter to the boiler must be changed from current 15mm to 22mm. The plumber I used said...
  3. D

    Toilet and Water Supply Pipe Sweating?

    Hi All, I have had this toilet for the past few years but noticing this year, that the water supply pipe is wet to touch and droplets are being formed. I initially suspected a leak however the whole base bottom of the cistern appears to be sweating which leads me to think it might be...
  4. A

    getting a wooshing sound in supply pipe after fitting new toilet

    Hi Just removed an old toilet and fitted a new push button cistern one. I had to re-route the supply water pipe over the waste pipe coming out of the back as i had to use a swan neck one to line up with waste hole in floor,and the water pipe didn't fit past waste pipe. I cut the supply pipe...
  5. J

    Old 'Town Gas' supply pipe

    Found an old capped off pipe when we removed the kitchen cupboards. Can anyone help advise how to get it removed? Please no guess work I can do enough of that myself, I also know how to Google gas safe engineers. Just wondering if anyone else in has one, has had theirs removed or has removed one...
  6. C

    32mm MDPE supply pipe upgrade for flow?

    Hello all, Currently suffering from poor internal flow rates near the internal 20mm stopcock of 10L/min. Want to upgrade system to either unvented cylinder or large storage combi to feed 5 bedrooms/1 bathroom/1en suite. Affinity water have confirmed supply pipe to the boundary stopcock is...
  7. S

    Mains Gas Supply Pipe Repair

    I was using a mini excavator in the front garden and cut the mains gas supply (website with gas location had it in the wrong place, but a disclaimer saying their info might be inaccurate - the engineer said it was probably moved when they changed the pipe to the new plastic sort). 1 Cadent...
  8. K

    Gas supply pipe to boiler

    Hi all - is the gas supply pipe between the gas meter and boiler covered by British Gas Homecare 2 ? I am sure I saw a useful diagram at one time that showed what pipe work was covered as part of HC cover levels ( and confirmed feed from meter to boiler was covered in HC 2) but can’t find it now
  9. A

    burying gas supply pipe

    The gas meter is outside the house on the side wall, we want a gas stove at the opposite end of the house so our plumber will run a new supply from the gas meter area along the front wall of the house to the opposite end, it will need to be buried. What depth should it be as we could dig the...
  10. P

    Black plastic water supply pipe - please help

    Hi, I've only just registered on this forum and hope there is someone out there that can help. I've just dismantled an old kitchen in our house ready for a new one to be installed. In the process, i unearthed a stopcock connected to the incoming water supply pipe which comes up in the middle of...
  11. W

    Help identifying component on gas supply pipe

    I have been surveying an empty house for an insurance company. The gas supply was isolated at a quarter turn ball valve upstream of the meter, but there was also a component upstream of that valve that I didn't recognise. Attached to it was a Southern Gas Networks label that had a tick at the...
  12. J

    New water supply pipe what size feed into boiler?

    Hi guys, Need a little help here and very new to all of this. We have a Victorian house and are struggling with low water flow, although pressure is ok. We want to have a decent thermostatic shower. Currently it is on a common supply pipe and we are house number 5 and it has a combi boiler...
  13. P

    Distance from main supply pipe or bolier most importnat for balancing

    Im going to balance my radiators because some are struggling, but I would like to understand the calc better. I have a central 22m supply and return pipe running from far left of house to far right of house through first floor joists, Boiler is at far left, pump is near boiler on supply pipe. I...
  14. C

    Water supply pipe joint fixing

    We recently had a leak in the water supple pipe between an external water meter and the where the pipe enters the building. The leak occurred where the pipe ran underneath the entrance walkway (about 600-700mm deep). Once we excavated and found the leak, we found it was at a joint in the pipe...
  15. F

    Question about a shared water supply pipe

    My semi-detached house is on a shared water supply with the neighbour and to fix the leaking stopcock on my side I dug part of it up and at the same time figured out the route it takes to next door. It's a lead pipe and a metre deep as you'd expect. It runs about 8m from the road and T's off...
  16. S

    Replacing lead supply pipe

    Hello, I am replacing a lead water pipe and wondered if it was necessary to have a stopcock outside the property like there is currently. it is seised and about 50cm from the Thames water plastic stop valve. i am of course planning to put a stopcock under the kitchen sink at the first...
  17. S

    Water main supply pipe leak?

    I hope asking this is not a problem and that you will be able to advise. I have either a problem with a leak somewhere to my drains or mains supply. Both enter/exit the house near to each other and there has been a damp/darkened area on the concrete over the area for a while. There is also a...
  18. M

    3/4" lead supply pipe

    I have a 3/4" bore lead water supply pipe. I have cut it back to where it enters the house. I wish to feed my house system via a whole house water filter, including the combi boiler. The static pressure is just under 4 bar. Should I use 22mm pipe to and from the whole house filter? I also...
  19. T

    Supply pipe replacement with MDPE - check my plan!

    Hi, I'm a competent person by diy standards and would like to understand if there are any serious flaws in the following plan. Currently the supply pipe comes from the water board's box and across the boundary in a 25mm MDPE blue pipe. That pipe is then joined to the original lead pipe, which I...
  20. T

    Supply pipe more help needed

    Thanks for all the advice so far, so i went down and cleaned out the stop tap chamber and its an ancient looking thing with the lead pipe soldered to the stop tap which looks like brass. See photo. The question is do i just lead lock the MDPE to the lead pipe, or should i melt the solder off to...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock