Search the forum,

seals

The United States Navy Sea, Air, and Land (SEAL) Teams, commonly known as Navy SEALs, are the U.S. Navy's primary special operations force and a component of the Naval Special Warfare Command. Among the SEALs' main functions are conducting small-unit special operation missions in maritime, jungle, urban, arctic, mountainous, and desert environments. SEALs are typically ordered to capture or to eliminate high level targets, or to gather intelligence behind enemy lines.All active SEALs are male and members of the U.S. Navy. The CIA's highly secretive and elite Special Operations Group (SOG) recruits operators from SEAL Teams, with joint operations going back to the MACV-SOG during the Vietnam War. This cooperation still exists today, as evidenced by military operations in Iraq and Afghanistan.

View More On Wikipedia.org
Recent contents Top users
  1. johnnybaloney

    Toilet flush valve seals - unusual sizing

    Hello, Recently I received an unusually large water bill which led me to the discovery of leaking flush valves. I have two toilets and it turned out in both the valve seals were bubbling so I set out to replace them. For now I just flipped them over as the other side was smooth on both. The...
  2. C

    Best lubricant for new seals on a Gazco balanced flue?

    Hi. Reinstalling a Gazco balanced flue and wondering what an ideal (silicone?) lubricant would be.
  3. J

    Seals for an alpha 240p

    Hello I’ve just has an annual service done on my boiler and the engineer has said the seals are getting hard and need replaced, but after going away to find the part has said he can’t fix it, does this sound right? Boiler looks on the older side but surely seals aren’t had to replace? If I can’t...
  4. S

    Flexible Waterproof Upstand Bath/Shower Seals -What's the best?

    Flexible Waterproof Upstand Bath/Shower Seals -What's the best Classi-Seal, Sealux AquaStrap, MX Flexi-Seal Strip? They all look to do the job, although the adhesive part of MX Flexi-Seal Strip looks smaller........... Any thoughts, ease of use, what have others used?
  5. M

    Sanitary silicone for seals?

    Hi, I have question. 2 days ago my bath hub trap got blocked so decided to replace it as they are quite cheap. In local store they sold me the all necessary equipment. I removed the old trap and installed new one. I used sanitary silicone so seal it everywhere. So I used thin layer under the...
  6. TeeCee

    Help Identifying Shower Seals

    Hi, I'm trying to replace an old shower door seal fitted by the previous owners of our house but I'm having some difficulties finding an exact match. The glass shower screen is cut at an angle where it meets the door to provide a neat fit and the seal is specially shaped to fit nicely over the...
    • TeeCee
    • Thread
    • america help identifying seals shower usa
    • Replies: 2
    • Forum: USA
  7. D

    Thermecon Option Oil Boiler 140/190 Seals

    Hi Folks Does anyone have info on the seals for the inspection hatches in this boiler. It badly needs servicing and looks to have been sealed with fire cement in the past. Are these rope seals (and what size) or bespoke seals. Wholesaler can't source them but loathed to open it up without...
  8. J

    Installing seals in Barber Wilsons gooseneck spout

    Please let me know how to replace the seals in a Barber Wilsons kitchen "gooseneck" faucet. These are the seals that go in the base of the gooseneck, not the individual faucets. I have the kit from BW - four rubber seals/washers, two metal "half" washers and an aerator. If you have photos of the...
  9. B

    Boiler front cover seals

    So had a bit of a discussion today regarding the above. We mainly work on Vaillant Ecotec pro’s, some pluses and ecomax’s. I know the front cover seal is ok if it has cracks and finger indents. (An advisory as per Vaillant technical). I also know it’s the main perimeter that forms the seal. I’m...
  10. Scott_D

    Vaillant g10 seals and servicing

    thought I would continue this here instead of the other thread When I went in the Ecotec training day a few years ago I was told to open the heat exchanger up every 5 years unless FGA reading say otherwise Every time you open the heat exchanger you should replace the seal Am I wrong? Or has...
  11. Crooksy88

    The correct order in which to place seals?

    I have a shower tray waste I'm putting together. Unfortunately the waste came with no instructions as to which seal goes where and as my first attempt resulted in a leak I thought I would get some professional advice ;). A is the drain slot in the shower tray. B is a rubber seal with grooves C...
  12. M

    Glow worm bypass seals

    Hi folks, anyone know what seals I need for the boiler below. Cannot find out if it is just the o'rings or seals as well. Cheers
  13. W

    Will One Shot damage seals on push fit waste?

    Might anyone know... Their FAQ doesn't A this Q. Thanks
  14. Deleted member 32524

    Vokera excell 80 sp combustion door seals

    Hi. Picked up new combustion door seals for this earlier and chucked them in van, just checked them and there is only 3 strips in bag about 1m long. Anyone know if I will get away with 3? Looks to me like I would need min 4 to do it all. (Did ask for 5 but spoke of the three doors, think he has...
  15. G

    Loft pipe stack seals

    Hi! I recently bought a new build for my terminally ill wife. I think the place is great but I'm worried about two things I hoped somebody could help me with. One is actually the roof - it has soffit vents only - somebody else told me ridge vents would also be good not only for ventilation but...
  16. B

    Magnaclean seals

    Does anyone know if the lid seal in a Magnaclean Micro 2 is the same size (same part) as an ordinary Magnaclean?
  17. S

    Astracast arvus tp0369 tap spout seals

    Please could somebody explain how to replace the spout seals on the astracast arvus tp0369 tap. I can strip the tap as far as the cartridge but can't seem to work out how to get to the spout seals. I could try unscrewing the collar above the spout with some vice grips or to try and pull it off...
  18. D

    Vaillant turbomax strange noise

    Hi, Can anyone give me an idea what is causing this problem? CH and DHW both start normally, but after about 20 seconds after the burner has ignited it makes this load noise. Sounds a bit like a airplane flying over! Then the temp on the gauge very quickly rises and the burner shuts...
    • Deathruddles
    • Thread
    • boiler burner engineer noise seals still strange turbomax vaillant
    • Replies: 7
    • Forum: Plumbing Jobs | The Job-board
  19. R

    when you think its easy!

    might of dropped a clanger! customers corner shower enclosure has seen the day with glass hanging out and seals missing. its a contract customer of mine supplying room lets and i told him be easier to change glass and frame than source and repair seals at a little extra by replacing screens...
  20. G

    baxi duo tec flue adapter seals

    anyone know the baxi product number for the 2 seals for the flue adapter, looked on net but cant find them. Baxi 5112369 flue adaptor he (no seals)
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock