Hello, I have a job with a Potterton Powermax system that is badly clogged up with sludge/rust from several leaks/ignored problems etc.
I want to powerlush it to try and solve some of the problems, and I just want to get clear in my head how to go about this.
I guess i'll disconnect the...
I’ve been called out to a problem with a Potterton Powermax involved.
The water pressure coming out of every tap dies off after around 30-50 secs.
I took the multi-block off & pressure tested the mains where I have over 4 bar coming in. I changed the multi-block & although I have a slight...
Simon C
Thread
expansion vessel
mains
potterton
powermax
problem
water
water pressure
water problem
I've just moved into a property with a Powermax HE boiler, and it only seems to produce one showers worth of hot water at a time. I then have to boost it for an hour before we can get another shower.
The hot water is set to come on from 13:00 to 17:00 every day.
Its controlled by a Hive system...
Hi Everyone
I have a very old Powermax 155 boiler which is 20 years old. A couple of years ago, I had a problem with the burner switch intermittently switching off and on and I was close to replacing the boiler but eventually someone came round and managed to fix the problem. I haven't had any...
Dear all. I am receiving quotes to replace a Powermax HE boiler with a combi type in a third floor flat. However they all include costs of replacing the flue & terminal (~£2k) which clearly is prohibitive. The flues and reducer below the terminal are accessible inside the loft space. Please...
So there's a few estates scattered around my way that have the dreaded powermax boilers.
All of them are installed in the middle of house in a cupboard upstairs with vertical twin pipe flue going vertical through the roof.
A good majority of these houses are town houses or 3 storeys.
How...
Powermax 155, I have been asked to service one. I'm G3 as well as gas safe. Anything to look out or watch out for ? Customer tells me there is a loud popping noise on ignition, I'm assuming possibly incorrectly this will be the electrodes. I,ve only ever removed and replaced with a conversion so...
Hi! Can anyone help? I have a Powermax 185 boiler which I recently had serviced and now seems to make a constant whistling sound?? We have called back the engineer who doesn’t seem to know what is causing the noise. It stops when the burner switches off and restarts after a couple of minutes...
got called to a potterton powermax he a27 fault.(dry fire)
phoned technical, said was a circulation problem. the pump was turning, water coming out of the bleed valve above burner,
could it be the diverter valve is jammed?
thanks...........phil
Apologies for the long post but I'm hoping to get a bit of advice.
Last week a plumber came in to replace a bathroom rad with a heated towel rack and remove a rad from downstairs in the hallway. The work seemed fine and our CH and hot water both came on as programmed that night. However the...
Enthus
Thread
always
aware
before
boiler
burner
fault
oil
plumber
powermax
Hi Guys
Went out to this boiler today, and don't repair many powermax boiler so was a little stamped.
The boiler tries to go through its sequence but the flame lockout led comes on with E.42 Fault displayed.
Even with the the lockout led on the 3port valve lever keeps moving back and...
Hi I have joined this great forum to try and get some advice from the experts here :smiley2:
9 years ago I built an extension that has been finished externally but due to a new baby arriving work stopped and it still hasnt been completed!!! At the time I bought a new boiler that is still...
Hi all
i have a regular customer with a Powermax 155x OV with pump and programmer.
i changed the flow switch as it was sticking - i also changed the dhw pump as it was faulty
after this there was minimal improvement.
i then removed the plate and descaled for a day using fernox ds-3 - this...
Radiator change today for a customer with a Promax 155 which i would like to thank for destroying my will to live!
These boilers are a nightmare in my opinion. took forever to fill up and vent system no where to vent the system on the boiler (open vented system). it then decides to trip out the...
Haven't come across these in a while, pump needs changing on one an they want a service doing.
The ones I do remember working on, am pretty sure they were problematic? Issues with flues?
Are these best staying clear of?
Thanks
Evening people :)
I'm attempting to fit a Drayton MiGenie Internet programmer thingy to a Powermax 155X OV and I can't see how the wiring goes at all.
The manual doesn't help as the image is far to small for me to see the stuff I need to see, and if I try to download it from the Internet, the...
Anyone know where there is an access point for a flue gas analyser probe on one of these things? As usual, there are no servicing and installation instructions. Thanks for any info.
My experience with this boiler is 0, was at property earlier installing shower customer also wants service, didn't have gasket so got it booked in for Friday.
My question is this boiler a positive pressure boiler? I've noticed the fan is on the air intake( twin pipe system) and the combustion...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.