You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
pliers
Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe. They are also useful for bending and compressing a wide range of materials. Generally, pliers consist of a pair of metal first-class levers joined at a fulcrum positioned closer to one end of the levers, creating short jaws on one side of the fulcrum, and longer handles on the other side. This arrangement creates a mechanical advantage, allowing the force of the hand's grip to be amplified and focused on an object with precision. The jaws can also be used to manipulate objects too small or unwieldy to be manipulated with the fingers.
Diagonal pliers, also called side cutters, are a similarly-shaped tool for cutting rather than holding, using a pair of stout blades, similar to scissors except that the cutting surfaces meet parallel to each other rather than overlapping. Ordinary (holding/squeezing) pliers may incorporate a small pair of such cutting blades. Pincers are a similar tool with a different type of head used for cutting and pulling, rather than squeezing. Tools designed for safely handling hot objects are usually called tongs. Special tools for making crimp connections in electrical and electronic applications are often called crimping pliers or crimpers; each type of connection uses its own dedicated tool.
There are many kinds of pliers made for various general and specific purposes.
Im a plumber mostly small bore houses etc. I have never used the Knipex Cobra Pliers Wrench. And dont know whether to buy a 7 inch or 10 inch. Hard to tell from picture on computer. Can anyone advise ?
First time posting so thank you for any help in advance.
I can't seem to open what I believe is a Lockshield valve, turning anti-clockwise and will not budge. I'm trying to turn the spindle in the centre.
Never had a radiator before and not entirely sure that is the issue is there something...
I recently had a leaking thermostat isolation valve changed on one of my downstairs radiators which involved draining the central heating system. After refilling the system from a combi boiler I bled all the radiators except for one upstairs which will not open. The key grips initially but it is...
I'm going to look at a job on Thursday but I wanted to run it past you first.
They're friends of my girlfriend and have said they've already had a plumber out who stated he couldn't fix it as he'd end up cracking the granite worktop.
The tap body is loose, the whole tap turns. I'm thinking the...
Looking to buy some new grips and was wondering if anyone has used these or similar ones?
Mongoose : Self-Adjusting Water Pump Pliers : SMC Corporation
Cheers.
Hi, sorry for the terminology if incorrect but the 3 way diverter valve on my central heating system appears to be stuck. At the timer CH is off, HW is on but both hot water and CH stay on (even with the room thermostat turned down to 10 degrees).
I've tried resetting the boiler, switching the...
ma701ss
Thread
diverter
diverter valve
pliers
plumber
quite
stuck
system
valve
Hi guys, am looking for a pair of ratchet spammers, seem to remember there being a link or thread on here about them, they're about £45-£50 big solid silver ones that look like pump pliers it have smooth teeth' like a set of adjustables,cheers
We have developed a new set of pliers that aid the installation of copper pipe. We are trying to go into production with the tool but have been told that we might need to get the tool approved first. I have asked WRAS for there opinion but as many of you already know WRAS do not deal with things...
Good afternoon,
was wondering if any one could help me with a problem?
I have just bought a new plug and chain bit cannot figure how to connect the chain with the top part of the plug as it seems too small? Could anyone help?
Hi all,
I've seen the 'hot bag' advertised in my local merchant - seems to be a few with different items inside....
seems a good price for what you get?
are they all that?
Hi
I have trouble with reviving a leaky tap. the tap head just wouldn't come off with an adjustable wrench. (It slips off the wrench.) Would a Ring Spanner be of more help?? What are the other things I can try?
Cheers
Ray
just thought id let you no about a tool i brought off ebay because im sad. Not the cheapest place i think you can buy them but there called neji saurus pliers, they are for removing rounded off screws and they are the shiz, cant recomend them enough!
Hi Friends
I just purchased a pair of Knipex alligator VDE water pump pliers.
Got them for £18.00 new 250mm.
I want to get another pair of the VDE model. Does anyone recommend a larger / smaller pair?
Also what are the cobra model twice the price?
Birthday in 12 days so need to buy myself...
Can anyone recommend some decent grips or pliers? Getting fed up with them lasting less than twelve months before deciding they dont want to grip anymore!
Cheers
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.