You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
outlets
Orlando International Premium Outlets (formerly Prime Outlets-Orlando) is an outdoor outlet mall in Orlando, Florida, United States along the northern end of International Drive.
Hi, I’m having issues with cold water to multiple outlets. Taps, showers, toilets cold water is fine at the kitchen sink. The hot water system is a Glenhill unvented cylinder. Hot water is fine at all outlets. I assumed the cold outlets not working were from the balanced cold from the...
Hi Guys
Need to pick your brains if you have a moment.
I attended a flat where in one bathroom the hot water on the basin had major low pressure. In the Ensuite shower it was the same issue in the hot water.
All the other hot water outlets in the property had good pressure. Bath and kitchen...
Ok so, I supplied a shower valve, overhead shower and riser to a customer that was having it installed by a plumber. Hands up I made a mistake when I ordered the valve and supplied a single outlet instead of twin. If the plumber had called me at time of install I could have swapped it for him...
Hi.
We’ve a pressurized megaflow system and the last few weeks we’ve lost water pressure on Just two outlets in the house. The first a Keuco mixer shower were the hot outlets is just a dribble where previously it filled the bath in 5 mins and the second a Quooker tap where the tank fed supply...
Got a brand new 25mm hdpe incoming main with pressure of 2/2.5 bar. Need to check flow rate but doesn’t look great at kitchen sink. The main connects to stopcock and is run in 28mm directly to cylinder which is located on 2nd floor of a town house. Hot and colds are run out in 22mm. It serves a...
Hi I'm just having a new heating system unvented Cylinder system boiler etc. The plumber is going to leave me a hot and cold ( balanced feed ) for the bathroom in the loft ive been looking at a few showers and ive seen a Grohe one that looks ok would this be ok on a pressurised system...
Preview
Hi
I need to move my existing external toilet and bath outlets due to having a rear extension built and they foul the roofline.
After advice / opinions on my preferred option which I have included as a sketch.
My main concern is:
1, If I'll need air admittance valves and where they need...
Hi,
I have installed a salamander pump for my shower. I primed both sides of the pump before turning and only got hot water even when I turned the the thermostat to cold. Checked I didn't have the feeds round the wrong and was all good. I decided to power the pump hoping the increase in...
I'm trying to connect my Garden Tap which has a 1" BSP outlet to my HydroSure Swivel Manifold.
The connector on the HydroSure becomes water tight when tightened with the thread all the way to the joint. The Tap outlet is not deep enough to cause this seal. The connector requires a depth of...
Hi all,
i am wanting to install the above but want to drive x4 outlets and am unsire if this is possible.
i want to drive;
1. Overhead shower
2. overhead shower jets
3. handheld shower
4. bath filler
its item 4 i am unsure about as on the grohe concealed body, when showing 4 way control it...
I have a 40CDi combi boiler in a 1920s house. The heating does not get hot just warm. I have 22mm from the boiler to under the floor but then connects to original half inch/15mm copper lagged with hessian. I believe I am losing heat as some of the runs are quite long. A local plumber said I need...
(I live in the UK so if supplying products please sugest UK items - many thanks)
I need some advice on how to fit a Washing machine/Dishwasher. Any feedback/ideas would me much appreciated.
Currently the sink is set up with one of these dual sink wash traps (see image or link at the bottom of...
Have recently had a new sink fitted. The trap (is that the right word?) underneath the old sink allowed for connections from the waste outlets on both the washing machine and the dishwasher but the new fitting has only provided one outlet, currently connected to the washing machine (far right on...
Hi all,
Hoping someone can help. I've not yet had a plumber out to check, thought I would get some opinions first if possible. What I perceive to be a problem may not be in reality. I have an unvented mains pressure cylinder in the basement set to 2 bar on the PRV from the mains which is...
A small H/W system with Imm Cylinder and two outlets to basin and sink - has been storing dormant
water for seven years in a void flat.
The idea is to now activate the H/W system in the Imm Heater cylinder and at the two outlets. (the shower is an elec unit).
Suggestions for a safe...
I have a problem with my toilet, it's the third time in the past six months this has happened.
when it's flushed the bowl fills much higher than usual and then takes around 10 minutes to drain. Also, it struggles with paper and solids.
Ive tried a plunger and a mop in a bag (YouTube) but...
Russell Whiting
Thread
before
drain
draining
months
oil
outlets
slow
toilet
Went to go change a diverter valve on Thursday. What was ordered was a single inlet/2 outlet valve. What was in there already was a 2 inlet/2 outlet valve non thermostatic (below).
I advised the wrong part was ordered and to order the correct valve.
My question is this: could I have modified...
hi, have a indirect hot water cylinder with hot and cold both fed from a 80 gallon cold water tank.
Have recently fitted a thermostatic bath shower mixer tap as didn't want to chase walls/remove tiles to fit a dedicated shower. Both has poor flow plus the flow to basin tap is generally poor...
Anyone know how to fit these in concealed arrangement?
The shower arm came with backnut - what use is that when you can't access the back? But it needs to be fixed sturdily to hold the shower head's weight. And if it's not tightened back then the outer chrome trim won't sit flush. Surely I...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.