ALL FOR SALE
33 x 1.4401/316 - ø28/ø15
10 x 1.4401/316 - ø22/ø15
19 x t connet ø15/ø15/ø15
26 x 90 degree ø15
17 x ø15/R 0.5"
02 x ø15 45 degree
06 x ø15/Rp.5"
11 x ø22/ø15/ø22
06 x 22/22/22
02 x 22/22/Rp.5
09 x 22mm chrome elbow
09 x 22mm chrome straight
05 x 15mm chrome elbow
03 x ø22/R.5"...
I have a large quantity of Gerberit Mapress Stainless Steel fittings available for sale in all types and sizes.
The fittings were surplus to requirements at my previous job and are all brand new
Looking to get rid so they're going for cheap!
Let me know if there is a particular type and size...
Looking to do a few large heating systems in this. Mains and plant room. Obviously using copper on potable supplies.
Have heard though, that even when looked after well. Ie, chemically dosed correctly and kept as oxygen free as possible. Apparently only has a 20-25 year life span!!
Is this true?
please PM your offer for the lot & contact details if interested
based in london delivery/collection
MAPRESS COPPER
14 X 54mm MALE IRON
11 X 35mm MALE IRON
22 X 28mm FEMALE IRON
2 X 28mm MALE IRON
24 X 15mm FEMALE IRON
4 X 15mm MALE IRON
15 X 22mm MALE IRON
2 X 42mm MALE IRON...
s.hemming
Thread
carbon
copper
fittings
for sale
lever
mapress
sale
valves
anyone know if the Adaptor union with male thread
would be suitable for ng/lpg but remove the black seal and replace it with a HNBR (Gas)
many thanks
shaun
ps emailed geberit already just wanted to know if any of you guys have done it?
I have to do a 54mm copper waste run due to it carrying high heat grease and water. I don't want to solder due to it having Whiterock walls. Also I think compression would look poor so was going to go the mapress route. A system I've never used before. My main question is, what's the max...
I was at a newish plant room the other week where they had used 4" stainless steel gas pipework in the ground connecting to mdpe.
There is little to no info of Mapress and gas in any books I have.
It's not the way I would have done it but what do you think?
Has anyone used Mapress gas on a domestic job?
I was going to fit a straight connecter the other day instead of soldering and removing the meter but decided not to incase the next guy had never seen it and thought it was dangerous.
Anybody had any issues with doing this? Completed an install to find a loads of problems with only 67mm fittings. Never had any issues with Mapress previously and this is our first time using xpress fittings. We're very careful reeming pipe etc but the tool doesn't seem to be crushing the...
Can 15mm low carbon mapress steel be joined directly to copper pipe of the the same size? Without a diaelectric break ie brass fitting. Have checked the gerberit web site and they say this is fine on a sealed system. This seems to fly in the face of joining dissimilar metals ferrous and non...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.