Search the forum,

blowing

Nose-blowing, or blowing your nose, is the act of expelling nasal mucus by exhaling forcefully through the nose. This is usually done into a facial tissue or handkerchief, facial tissues being more hygienic as they are disposed of after each use while handkerchiefs are softer, environmentally-friendly, can be reused after washing and after more stylish. However handkerchiefs have become unpopular due to their unhygienic nature but are often better than sneezing into hands or clothes.
Nose-blowing may be used to alleviate nasal congestion or rhinorrhea (runny nose) resulting from colds, seasonal allergies, or to expel nasal irritants.

View More On Wikipedia.org
Recent contents Top users
  1. S

    Main Boiler circuit fuse blowing.

    This morning woke up to no central heating, but the hot water had been on earlier in the morning. I checked the programmer and it was indicating CH was on. Went to the room thermostat and it didnt click when rotated, but then started clicking without any input. I had a spare room thermostat...
  2. A

    Heating fuses blowing

    Hi all I have a problem with a fuse constantly blowing on the heating system. It’s only been in the last few days… the zone valves are working fine and opening as normal and it only happens after about 10 mins of running for hot water or heating. The pump is making a noise like there is air...
  3. A

    Banging Pipes, blowing off joints HELP!

    So house 4 years old. In that time had 7 pipes burst. Builder fixed first one, blaming cylinder not being serviced. Over the 3 years another 2 went. Builder not interested as out of 2 year cover. Nov last year another went. Plumber came and fixed, said looks like shoddy installation. No sooner...
    • Angela Hesketh
    • Thread
    • america banging blowing help joints pipes usa
    • Replies: 2
    • Forum: USA
  4. K

    Advice please as plume is blowing into my property

    Hi my next door neighbour has had a new boiler fitted this week. The plume from the boiler is setting off my outside light. It’s blowing up against my property and it comes in my bathroom window and bedroom window when they are open. The condensate has been run down the wall in the alley for a...
    • Kascom
    • Thread
    • advice america blowing please plume property usa
    • Replies: 5
    • Forum: USA
  5. S

    Potterton Gold H blowing spur fuse

    Hi Guys, Need some help. Potterton Gold H keeps blowing the spur fuse when running ether hot water or heating. System is a Y plan and 3 port valve has recently been replaced however issue has been ongoing customer has said for past 2 years. Fuse blows within few minutes of running hw or ch...
  6. T

    Air / Blowing / Whooshing Sound in All Radiators

    I hear a noise in all of my radiators. The higher the TRV setting the louder the noise gets. If I turn the TRV down to a low setting the noise goes away, presumably because the radiator is no longer heating up. The noise sounds like air moving around the system, although it's very loud. It...
  7. P

    Myson kickspace 600 blowing intetmittantly

    Have a kickspace which blows intetmittantly. Goes on for about 20 s then off and comes on again later only for short period again. Checked flow and return and appears return is only luke warm. New flexis replaced with a bigger bore. Could it be the kickspace that's blocked? Thanks
    • Pisces67
    • Thread
    • america blowing myson usa
    • Replies: 9
    • Forum: USA
  8. I

    Shower pump blowing fuse

    Hi all, I have a Salamander CT30 shower pump that was installed by a plumber in October 2019 and the other day it would not start. I checked the fuse first and it was blown so I replaced it. The second the power was switched on the pump started, (or sounded likeit did) but instantly blew the...
    • itsmehere
    • Thread
    • america blowing fuse pump shower shower pump usa
    • Replies: 2
    • Forum: USA
  9. J

    G3 Registered, replacement control valve blowing off

    Hi Guys Just wanted to pick your brains on this one. (I'm g3) Customer has a 250 litre un-vented cylinder in his loft. He called me to the blow off dripping outside. The expansion vessel had failed and it was fitted at the bottom of the cylinder on the floor of the loft. The control valve...
  10. J

    philmac fittings blowing off.

    hi folks, I have a problem with a fairly new housing project. I have philmac pipe 25mm connected below sinks onto a philmac union and they keep blowing off, I have had scottish water to the properties who have tested the pressure which is sitting at 5 bar, pipework does not have any clips below...
    • jonny1977
    • Thread
    • america blowing fittings philmac usa
    • Replies: 1
    • Forum: USA
  11. J

    2amp boiler fuse inside keeps blowing

    Recently bought a house and boiler was working fine. Now wont turn on so opened up and saw the 2amp fuse looked like it had blown. So replaced with another 2amp fuse and it keeps blowing that fuse instantly. Any ideas? Im on the verge of moving into it with my family and we have ran out of money...
  12. AMGasServices

    S plan blowing fuse any ideas

    Hi, A friend has s plan system, unvented how water tank, ideal logic heat only boiler and potterton programmer (was changed with like for like about 6 months ago). It keeps blowing the 3a fuse in the fuse spur. Boilers been turned off at the front of the boiler (the control knob) and issue...
  13. J

    Internal fuse keeps blowing when i connect HW zone i to my wiring centre!

    I have wired an s plan plus system. Consists of 2 hot water 2 port valves and one central heating 2 port valve. The boiler is a worcester bosch cd classic. Problem began when i turned the boiler on first time and nothing happened! Found that the internal 2.5A slow blow fuse had blown...
    • John Smiley
    • Thread
    • blowing centre connect forum fuse internal keeps plumbing wiring zone
    • Replies: 18
    • Forum: Plumbing Zone
  14. N

    Fuse blowing on Altech/JG Speedfit underfloor heating system

    Hello, I have a wireless underfloor system controlled by altech receivers and transmitters. There is also a JG speedfit control board and distribution board. As soon as the transmitter connects to the receiver, a green light turns on and the actuator valves on a manifold attempt to turn on. As...
    • Nikita
    • Thread
    • altech blowing fuse heating heating system speedfit system ufh under floor heating underfloor underfloor heating
    • Replies: 1
    • Forum: Plumbing Jobs | The Job-board
  15. P

    blowing in the wind AKA can anybody identify this?

    Hello I know this is a long shot but there's no harm in asking. The most trival of faults is going to cost me dear. I simply can find nobody who can identify this mixer or the cartridge in question. The blue compression washer has fatigued slightly, causing a drip when the unit is off...
  16. R

    Worcester 28i Junior prv blowing after replacement

    Hi the boiler had been losing pressure for some time so we kept topping it up. We diagnosed that the prv had gone because it had been blowing and the expansion vessel had gone because it was letting water out instead of air. We replaced the prv and attached an external expansion vessel. We...
  17. M

    Worcester Greenstar 15 ri blowing internal fuse

    Hi, Attended this yesterday, with the internal fuse blowing as soon as it is switched on. I disconnected ALL the current draws from the PCB and still the fuse blows so it must either be the transformer or the PCB. As the transformer is available as a plug in item I was hoping some one can...
  18. S

    Glow Worm 30cxi - Main PCB blowing, any advice?

    Good Morning Everyone, I have a Glow Worm 30cxi Condensing Combi Boiler. Last week, the main pcb died. I got the board replaced (4000124180). Boiler came back on, happy days. I did notice that the water was nowhere near as hot as it should be and been advised the Plate to Plate Heat Exchanger...
  19. jaydebruyne

    New heating controls and wiring

    I just need confirmation I'm doing this right as per my drawing.. Not sure if this is clear enough.. but... I've replaced an old mechanical timer and room stat and had to rewire as custard wanted them relocated. I was trying to do this without a wiring centre and it kept blowing the fuse...
  20. R

    anyone fancy blowing up parliment?

    how about nov 5th? just intercepted a letter to my lad from DWP as they stopped dissability payment 6 months ago so hes been without any income/assistance since then! its an assesment consultation interview to see if his mental disability on the autistic spectrum has got any better or hes...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock