Search the forum,

Outside tap screw query

Discuss Outside tap screw query in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

scoz

Messages
90
on an outside tap what is the reason for the small screw underneath the tap body.
 
If it's got a little plug/screw in the check valve it's a verifiable one.
 
Status
Not open for further replies.

Reply to Outside tap screw query in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
Outside tap loss of pressure
I’ve lost the pressure from the outside tap. It was working fine. I have checked the washer on the outside tap and the inside stop valve seen in the picture. Not sure what the thing is to the right of the stopcock? I’ve also taken the inners out of the outside tap and turned on the water again...
Replies
6
Views
212
snowhead
snowhead
T
Prevent Outside Tap Feed Freezing
I had an outside tap fitted by a professional plumber last autumn. During the recent cold weather the feed pipe under the kitchen sink froze and the compression joint where the pipe enters an isolation valve now leaks. The outside tap was covered for the winter by an insulating blanket. I...
Replies
20
Views
914
Traveller 47
T
surfsup
Outside tap lost pressure since cold snap
My outside tap has had really low pressure after the cold weather a few weeks ago. Its connected from under the kitchen sink, and can be isolated from turning a flat head screw type thing a quarter turn. Any help or advice would be much appreciated!
Replies
5
Views
422
Lou
Lou
G
Outside tap not working.
Hi all I'm having an issue with my outside tap not working, the tiniest of dribbles comes put each time I try it. Ive changed the tap to no avail so thinking I should change the stopcock tap thing under the sink? Please see attached photos. Many thanks for and advice. Cheers Gary
Replies
5
Views
259
Garreeee
G
A
How do I remove a rounded off screw from kitchen mixer tap?
I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of the tap. However now I can't remove it again as it seems I must have used the wrong screw head and have rounded off the head. Please see attached...
Replies
9
Views
375
Ben-gee
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock