Search the forum,

Sabre boiler in kitchen cupboard

Discuss Sabre boiler in kitchen cupboard in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Pompeymike79

Messages
3
Hi
I'm about to refit our kitchen, but have a pretty ugly Sabre 29 HE boiler in one corner. Am I able to build this into a kitchen cabinet?

The installation guidance gives a minimum clearance at the front of 600mm, but does this include a kitchen cabinet door?

Thanks in advance.

Mike
 
No it doesn't the given sizes are clear sizes so after them your fine
 
Pompeymike79 said:
Hi
I'm about to refit our kitchen, but have a pretty ugly Sabre 29 HE boiler in one corner. Am I able to build this into a kitchen cabinet?

The installation guidance gives a minimum clearance at the front of 600mm, but does this include a kitchen cabinet door?

Thanks in advance.

Mike
Click to expand...
If you are fitting a new kitchen do you have the budget to change the boiler at the same time?
 
Pompeymike79 said:
Hi, sorry I'm probably being dumb, but I don't think I understand. Is it ok to put it in a kitchen cabinet?
Click to expand...

Yes fine just make sure it can be removed when you decide to change the boiler
 
Harvest makes a good point , the last thing you want is to be changing the boiler after the kitchen is fitted , yes ok its fine now and hopefully will be for a few years to come , have you any idea how old it is , if its under 5 forget it , if its approaching 10 , I would seriously consider it . My opinion of course .
 
I agree i would seriously consider changing it you will achieve a better finish on your new kitchen as a modern boiler is alot smaller . cheers kop
 
Status
Not open for further replies.

Reply to Sabre boiler in kitchen cupboard in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
169
cheddarman
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
109
Stigster
Stigster
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Firefox
F
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
246
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
145
johndave
johndave
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock