Search the forum,

Discuss What is this? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

justjus1701

Hi, I live in a small block of flats and look after the grounds etc. The other day I noticed a leak coming from a pipe with a cage around it (see below), where is the water coming from ? Rads, boiler ? Any help would be appreciated. Thanks. Justin
 

Attachments

  • 28032010653.jpg
    28032010653.jpg
    88.8 KB · Views: 84
the fact the pipes have a cage would suggest (to me anyway!!) that the pipes are likely to discharge hot water, do the properties have unvented hot water tanks? you will really need a plumber to have a look and trace which property the water is coming from and get it attended to
 
As said would have thought a unvented cylinder in one of the flats needs attention,re priming or maybe over heating,requires sorting,re priming can be done by following instructions hopefully on side of cylinder,if over heating qualified unvented plumber required,the flat that is leaking should be able to tell by looking in cylinder cupboard,check visible pipe work and you should see an open plastic (usually black)pot called a tundish that shows the dripping going through it to out side

imho
 
Hi. If these are just a couple of many on the building? it may well make life easier in the long term if you trace and tag the pipes with flat numbers. It saves trying to access numerous flats to find the fault. Good Luck
 
Hi Guys, Thanks for the help . It is an unvented water system and the block only consists of 6 units......fortunately. I will do some investigating....now I know (kind of) what I'm looking for. I did wonder what the turndish was for. My airing cupborad looks like the inner workings of a space shuttle!
 
As said would have thought a unvented cylinder in one of the flats needs attention,re priming or maybe over heating,requires sorting,re priming can be done by following instructions hopefully on side of cylinder,if over heating qualified unvented plumber required,the flat that is leaking should be able to tell by looking in cylinder cupboard,check visible pipe work and you should see an open plastic (usually black)pot called a tundish that shows the dripping going through it to out side

imho

they should also go to a drain or low level
 
It looks like the flats have suspended floors (plastic trickle air vent). It would be wise to get the problem sorted quick to avoid damage to the internal fabric of the building.
 
Status
Not open for further replies.

Reply to What is this? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
Replies
4
Views
571
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and plasterboard celling. I have got unvented pressurized RM Cylinders hot water system with 27KW Worchester gas boiler with expansion vessels . When...
Replies
2
Views
442
losing pressure
L
Hi all, I would really appreciate your eyes on these pictures - What do you see ? Does anything look strange about the Rockwool insulation to you? I suspect that my long ongoing rotting veg/sewage smell is caused by a fault in this connection that has been hidden from previous inspections...
Replies
11
Views
612
Hi, I need some urgent advice. I've Just come home after going out for evening, to discover hallway floor and kitchen floor covered in water. On further inspection I discovered that water was coming from boiler cupboard. On looking in boiler cupboard I found boiler has started leaking water...
Replies
1
Views
473
Context for issue: Last winter the temperature switch on my boiler shorted somehow, the boiler was then running WAY too hot and ended up blowing/melting a hole in one of the pipes. I repaired this by putting in a new stretch of pipe in and just connecting it to the existing pipes with two...
Replies
6
Views
553
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock