Search the forum,

worcester 9.24

Discuss worcester 9.24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

stevetheplumber

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,619
just had a call from a customer wh s a worcester 9.24evidently for some time he has only been able to get hot water when the heatings on ok that sounds like diphram or threeway valve then he said but now its going to lock out when he runs a tap any suggestions ? im hopn to get a boiler change out of it but just want pointers to possibe causes chances are ill get there and the fan will be one
 
9.24 overheat could be a simple as a sensor or more likely muck/sludge. Not worth resolving due to cost maybe :) Also spot on regards hot water only with C/H ... Depending on the model could mean replacing diverter or diaphragm, depending on whether you can do the diaphragm or not due to positon...!
 
not forgetting the divertors obsolete on 9.24,it has a 1/2 swivel on a spigot for the cold in much like a 1/2 swivel on the normal Giannini e type diverters we use flat 1,2inch washers different set up on the 9.24 if the screws near the weap hole come out no problem you can take the base off and fit it to a normal e type if the have rotted in your stuffed better to advise replacement Steve IMHO
 
:iamwithstupid:

Please tell me where to find such fine smileys!!!!

Kev.
 
because if you get lippy your off on a blind date with this dancing retard.jpg
 
Status
Not open for further replies.

Reply to worcester 9.24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
288
Chuck
C
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
345
Last Plumber
Last Plumber
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
0
Views
27
Filthbags
F
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
191
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock