Search the forum,

Discuss New regular boiler (heat only) in a sealed system?? in the Central Heating Forum area at PlumbersForums.net

Messages
22
Hi, I am replacing our 11 year old boiler (due to H.Ex. leak) with a new one. This is in a "sealed" system with red expansion vessel in airig cupboard & a megaflo (no tank in loft). However the exisiting boiler is Vaillant ecoTEC 4xx boiler - which is satated by vaillant as an "open vent" boiler (has no internal pump). So at least in theory I have been running with the "wrong" boiler for 11 years...??
I have asked for quotes from 2 local plumbers and initially they both recommended to replaced like for like and stay with the same boiler.
This is a large house mainly with UFH (3 manifolds and 3 small rads upstairs).

Just heard from one of them that he now realised I need a "system" boiler and therefore I should fit an ecoTEC plus 6 (not 4!)

Question(s):
Can I install an "open vent" boiler in a sealed system without invalidating new boiler warranty?

If I can not and it must be defined as a "system" boiler, what do I do with the exsiting CH pump (in airing cupboard)?
Can the existing pump be made to work with the internal pump of the system-boiler?

Is there a risk the 2 pumps will create too much pressure in new boiler?

Thanks in advance!
 
Open vented boilers can be fitted on either a open vent eg gravity system or a sealed system eg with a red expansion vessel etc better in my opinion as they don’t use expensive and manufacture only components eg pump, expansion vessels and diverters

You would have to remove the external pump
 
Stick with heat only. You most probably still require an additional expansion vessel due to system volume if its got underfloor heating and you wouldn't gain anything by conversion to a system boiler apart from more things to go wrong.
 

Reply to New regular boiler (heat only) in a sealed system?? in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
250
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
442
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock