Search the forum,

Guess the Cartridge

Discuss Guess the Cartridge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

charliejamesuk

Hi All,

Can you help me track down spares of the cartridge shown below. Its taken from a Basin Mixer Tap with a Swivel Spout. Only info customer has found is a guarantee card for 'TapMate' who I believe are now owned by Bristan. I have looked on the Bristan spares website and hardly any of the images load, I then tried calling them but gave up after 20mins on hold.

In all my happy snapping I totally forgot to take one of the actual tap! Its very marginally like this one in design [DLMURL="http://www.diy.com/diy/jsp/bq/nav.jsp?action=detail&fh_secondid=9986502&fh_view_size=12&fh_start_index=24&fh_eds=%3f&fh_location=%2f%2fcatalog01%2fen_GB%2fcategories%3C%7B9372014%7D%2fcategories%3C%7B9372035%7D%2fcategories%3C%7B9372173%7D%2fspecificationsProductType%3dbasin_taps%2fspecificationsSpecificProductType%3done_hole_basin_taps&fh_refview=lister&ts=1294328277276&isSearch=false"]http://www.diy.com/diy/jsp/bq/nav.jsp?action=detail&fh_secondid=9986502&fh_view_size=12&fh_start_index=24&fh_eds=%3f&fh_location=%2f%2fcatalog01%2fen_GB%2fcategories%3C{9372014}%2fcategories%3C{9372035}%2fcategories%3C{9372173}%2fspecificationsProductType%3dbasin_taps%2fspecificationsSpecificProductType%3done_hole_basin_taps&fh_refview=lister&ts=1294328277276&isSearch=false
[/DLMURL]
IMG_0231.jpgIMG_0229.jpgIMG_0230.jpgIMG_0228.jpg

Any help is greatly appreciated.
 
Last edited by a moderator:
Are they not just quarter turn tapheads. Most plumbers merchants sell them. Just watch the spindle size.
 
Plumbstar Tom said:
best bet is to send an image to the manufacturer then as they all look pretty much the same unttil you fit it
Click to expand...

Thanks, have just tried this. Not very impressed with their website, hardly any of the images work!
 
garrywhite said:
Are they not just quarter turn tapheads. Most plumbers merchants sell them. Just watch the spindle size.
Click to expand...

Problem I find with that is that the Merchants have the valves vacuum sealed in plastic so won't let you stand there trying them all. Or is this only Plumb Centre?
 
charliejamesuk said:
Problem I find with that is that the Merchants have the valves vacuum sealed in plastic so won't let you stand there trying them all. Or is this only Plumb Centre?
Click to expand...
just plumb center i asked for something that was on the shelf 6ft away the other day and they wouldnt sell it as it wasnt on the computer
 
B and Q have them on display. Ok, vacuum sealed packaging but atleast you can get a closer look when someone else rips open the package.
 
oh the pcket that was ripped before you got to it? lol :):):)

there are loads of CD valves on the market so good luck

if its not for your self I would recommend a new tap
 
try here, they seem to have a lot with all the dimensions etc. [DLMURL="http://www.ypcb.co.uk/"]Lunns.net[/DLMURL] click on ceramic disc cartridges. quite a few tapmate options.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Guess the Cartridge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
135
johndave
johndave
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
187
Dave Moore
D
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
102
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock