Search the forum,

Vaillant Turbomax cold feed pipe 080945

Discuss Vaillant Turbomax cold feed pipe 080945 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Harvest Fields

Harvest Fields

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,444
Anyone got one of these knocking around there van/garage? Preferably one that doesn’t have a pin hole in the side of it? Thought I would ask before trying to strip the chrome back and solder a couple on to it.

CA662425-00A2-476D-B0CF-06F9B2EE94BD.jpeg
 
Harvest Fields said:
Anyone got one of these knocking around there van/garage? Preferably one that doesn’t have a pin hole in the side of it? Thought I would ask before trying to strip the chrome back and solder a couple on to it.

View attachment 39455
Click to expand...
As we are in the Arms..
Soft rubber covered with jubilee clip
Chewing gum
Gaffa tape
Half a roll of PTFE tape and jubilee clip

Just saying.........
:D
 
bogrodder said:
That is absolutely flipping stupid, putting a boiler up there. Some people eh?
Click to expand...

least the new one will get put in a better place than up there
 

Reply to Vaillant Turbomax cold feed pipe 080945 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Stigster
Stigster
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
115
ChrisGid
C
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
223
oz-plumber
O
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
168
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock