Search the forum,

Discuss help identifying this bath/shower mixer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hello,

this is my first post on here.
i am trying to stop water weeping from the temperature control side handle of this tap.
I am going to replace the o rings but can't see any markings on the taps to identify them. i contacted grohe because i thought it looked like a sentosa but grohe say it's not theirs. any help would be greatly appreciated.
if i can't match the o rings with new ones would wrapping ptfe round the existing rings be a decent fix?

thanks ,
Rob
tap 2.jpg
tap 1.jpg
tap 2.jpg
tap 1.jpg
 
Guess you could send photos to the shower doc and see what they say and ptfe under the O-ring might be a short term fix.
 

Reply to help identifying this bath/shower mixer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock