Discuss Had a bump in the van in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 34,309
- Solutions
- 2
did they admit fault?
- Messages
- 10,444
Never admit anything. 
- Messages
- 6,131
Not really. Tourist in a hire car trying to get back onto the motorway
Last edited:
- Messages
- 34,309
- Solutions
- 2
Feck sake
- Messages
- 6,131
Thats exactly what I shouted as they hit me
- Messages
- 10,444
- Messages
- 8,642
Dash cam ???
- Messages
- 6,131
No
But I think I will buy one
- Messages
- 8,642
Mines been bust for months now , I better get my finger out now
- Messages
- 6,131
What do you have?
So many to choose from it’s a minefield
- Messages
- 725
Defo get a cam. Just had some idiot try and say I cut him up before he went in to the back of me. If I had a cam that would not have been a problem now it is a pain. His word against mine as no witnesses.
- Messages
- 5,439
I had one too last week. Well not so much a bump as a big dent in the passenger door and an exploded window. Write off. Fun times.
- Messages
- 6,157
Occupational hazard Scott its happened to us all mate hope you have a satisfactory outcome. Kop
- Messages
- 8,642
It is a minefield pal , mine is too complicated, I will go find a cheaper one with less features, let me know how you get on .
Reply to Had a bump in the van in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi Folks, advice needed here... I am a 51 yr old leak detection engineer/plumber 2 years into self employment which i am loving. To get going I bought a 61 plate transit which has been great but is now off the road for a few weeks at least - which now that i am established and making decent...
Hi Oil experts. I had a grant wall boiler with a failed transformer. Carried out a service and pretty sooty nozzle, and baffles build up suggest not cleaned in a while. The bottom baffle on the left corner had completely burnet through.
Any Idea on the process on how this occurs and why just...
I've had a spate of low pressure issues recently.
MWP @ about 17.5mb
Centrica engineers are a special breed but I couldn't take being told again that I was wrong so I asked the last one to prove the pressure was OK. The guy quite confidently passed me his basic u-gauge to confirm my digital one...
Hey all,
Looking for some advice. My mother recently had her boiler changed but in the process the water had to be turned on and off as you would expect and the engineer broke of the handle. Luckily it seems you can close the valve with some pliers on the but I don't believe this is best for...
About 10 months I started having issues with a gas like smell in my home and the gas board was unable to find any gas leak I've still got the issue.
When I first made contacted enviromental health I was told the following
Could be my drains and to have my drains checked.
Could be the sewers...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-