Search the forum,

Help with Soil pipe fall

Discuss Help with Soil pipe fall in the Plumbing Jobs | The Job-board area at PlumbersForums.net

B

Birdie09

Messages
6
hi im fitting a toilet, the toilet has a elbow and the run is 920mm and the drop is 150mm to the drainage pipe in the corner, im was just wanting some help with the fall as i looks to steep but the run is not far, and help please. thanks
 
15mm a meter
 
Ok great thanks, is it possible to extend the pipe into the ground. I have a T as it has a breath on top( if that what it’s called) , just wondered how to raise it thanks
 
I’m using a hang of the wall pan, the soil pipe is about 20mm off the floor and the drainage pipe is in the corner about 920mm away and just sits about ground level so when I put the T in it’s about 50mm of the floor so it’s way out I think
 
Pics please
 
B6FE8FD7-E0FB-499F-A935-48E609232D47.jpeg
0E7F6906-6254-4246-8F43-ADFF7184ED28.jpeg
 
Can’t see from pics but if the branch is push fit at the bottom then just pull it out and add a short collar before reinserting it.
If that’s not possible, just join the wc to the branch as it is - less favourable but it will work.
 
Two street 45 should be fine

Or one street 45 off the toilet connector and then a piece of pipe into the tee
 

Reply to Help with Soil pipe fall in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
199
Dave Moore
D
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
209
ShaunCorbs
ShaunCorbs
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
253
Chuck
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Stigster
Stigster
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
408
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock