Search the forum,

What connector do I need on this shower valve please?

Discuss What connector do I need on this shower valve please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

T

Tom8521

Messages
3
I am putting a shower in, but cant fathom what connector I need to use to get the mains water supply connected to the valve.

The water coming into the valve will be via 15mm pipes, but the opening at the moment is bigger than that so I need a reducer or something for this I think.
Screenshot_20190525-175523_Gallery.jpg


I'm aiming to connect using speed fit fittings

(See attached image)

Can you advise?
 
1/2 male iron
 
This showed up when I searched male iron:

https://www.NoLinkingToThis/p/tecti...e-iron-coupler-15mm-x/784fj?_requestid=450208

I'm not sure it is the right size to screw in though.
 
Measures around 20mm dia
 
Inside dia
 

Reply to What connector do I need on this shower valve please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
166
ShaunCorbs
ShaunCorbs
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
143
johndave
johndave
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
182
ShaunCorbs
ShaunCorbs
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
102
ChrisGid
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
244
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock