FGA how do you store yours?

Scott_D · May 19, 2019

I have a Kane and use the bag it came in but looking for something better.
Any clever ideas?
A tool box that can be used as a hop-up maybe

Harvest Fields · May 19, 2019

I use my kane bag. It also has my multimeter and water gauge in it.

EvilDrPorkChop · May 19, 2019

We use these, in fact when we took them to Kane to be serviced they were so impressed they were considering ordering some.

Cut the foam to suit FGA/printer etc. Just be careful on sizes as I ordered one way too big at first. If you'd like i'll measure mine as they're a perfect size.

https://cpc.farnell.com/c/tools-maintenance/storage/water-resistant-cases

Harvest Fields · May 19, 2019

Cannot fit much else in there though.

EvilDrPorkChop · May 19, 2019

Harvest Fields said:
Cannot fit much else in there though.

Like what?

I get nearly everything in mine. FGA, printer, charger, spare paper, spare filters, smoke matches, smoke pellets, 10mm spanner, pressure testing hose and temp clamps. Not sure what else you'd want?

Harvest Fields · May 19, 2019

EvilDrPorkChop said:
Like what?

I get nearly everything in mine. FGA, printer, charger, spare paper, spare filters, smoke matches, smoke pellets, 10mm spanner, pressure testing hose and temp clamps. Not sure what else you'd want?

Multimeter.

EvilDrPorkChop · May 19, 2019

Harvest Fields said:
Multimeter.

Ah, see I have a separate servicing tool box for that

Riley · May 19, 2019

EvilDrPorkChop said:
We use these, in fact when we took them to Kane to be serviced they were so impressed they were considering ordering some.

Cut the foam to suit FGA/printer etc. Just be careful on sizes as I ordered one way too big at first. If you'd like i'll measure mine as they're a perfect size.

https://cpc.farnell.com/c/tools-maintenance/storage/water-resistant-cases

Would you mind measuring mate. They look wicked

Harvest Fields · May 19, 2019

Pop a picture of yours up as well mate. If you can.

Riley · May 19, 2019

Good shout

Harvest Fields · May 19, 2019

Thanks

EvilDrPorkChop · May 19, 2019

Here you go chaps. I have two probes in mine (Flexi and Standard) along with 2 pressure testing hoses. You'd have more room if you only had one of each.

Case size is 460wide*360tall*180deep.

This must be it - https://cpc.farnell.com/duratool/d03133/water-resistant-case-470x357x176mm/dp/SG33493

Looks like they've changed the design ever so slightly, not sure if the internal foam is the same where you can cut it out for pockets. For £26+VAT they aren't bad. I've had mine about 5 years now.

There's this one though that looks like where you can cut the foam out to make pockets, but it's a bit more at £45. - https://cpc.farnell.com/max-waterpr.../waterproof-case-464x366x176-black/dp/SG33340