Search the forum,

Recognise this shower? Replace with???

Discuss Recognise this shower? Replace with??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

A

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
Hi, I was sent this photo today. Been told it leaks - not sure where from. Customer wants it replacing. Said I'd have to take a look but canyone recommend a suitable replacement?


Thanks
 
Doh..... Here we go

IMG-20190327-WA0000.jpg
 
Supposed to be looking tomorrow afternoon, will update. If tiles are ok behind chrome and 150 pipe centres might be able to use a standard exposed unit.
 
Not sure the more I look at it.
Does look familiar though.
The blue/green colour of the lettering looks similar to Newteam
I would replace it all
 
Went to have a look this afternoon. No brand found anywhere. 135mm pipe centres. Bristan Sonique should be a good replacement.

Will need to use chrome shrouds where the pipes enter.
 
Send a picture to shower doctor they may be able to help.

Just fitted 2x Soniques
The riser kit is a bit flimsy
If I had more time I would have liked to try removing the flow restrictor to see if it performed better
 

Reply to Recognise this shower? Replace with??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
291
Bp89
B
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
223
Firefox
F
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
141
mutley racers
M
L
My son has an Apprentice interview- please help.
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
394
Chuck
C
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Splitty
S
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock