Search the forum,

Discuss New build - rad to towel rail in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Scott_D

Plumbers Arms member
Plumber
Gas Engineer
Subscribed
Messages
6,131
I have been asked to change a rad to a towel rail in a new build bathroom

As you can imagine it’s 10mm plastic out the wall

Has anyone got an image of 10mm plastic into a towel rail so that I can show the customer how it will look if I just swap as they have asked?

Do I have any options other that opening the wall and changing to copper?
 
Best I can find online.

4AFF2839-0545-4AAE-AD84-D97ADA7CC4F2.jpeg
 
Depends where the studs are could pull the plate off and have a look etc then put the 10mm back in the wall and drill 2 new holes so they go straight into the valves
 
Is that the general standard of piping in the UK.?
If it is, it's absolutely woeful

But then again - have a look at the silicon finish on the edge of the shower screen to the wall.
 
Is that the general standard of piping in the UK.?
If it is, it's absolutely woeful

But then again - have a look at the silicon finish on the edge of the shower screen to the wall.
It’s ‘new build’ standard
 

Reply to New build - rad to towel rail in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock