Search the forum,

Discuss Potterton H24, goes to lockout after stat turned down in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Ted808

Plumbers Arms member
Plumber
Gas Engineer
Messages
359
No paperwork - littl' ol' lady with no idea-
She turns the roomstat down at night and then in the morning when she turns it up, boiler doesn't fire, she has to go an reset it, then it works fine again.
Fan is a little noisy/ 'gold' pump at boiler end is quite noisy/ gas supply is 22mB working@mtr / condensate trap, pipe clear
Of course I coudn't replicate the fault in 2hours...

Would like to change the 'gold' pump, the fan, the pcb, powerflush and....... ha ha the whole lot?
ANY IDEAS

IMG_20190307_121826315.jpg


IMG_20190307_121850215.jpg
 

Reply to Potterton H24, goes to lockout after stat turned down in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello - I have a weird issue with a potterton suprima 60 with the old type of PCB with the round reset button (not Siemens). I just replaced the pcb a few weeks ago. I started getting a continuous red light when starting the boiler yesterday. Turning the boiler on/off or resetting it does not...
Replies
0
Views
927
    • Like
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical, carpentry it's been never ending. The house was built by Barratt Homes in the year 2000, it is a 3 bedroom house called a Palmerston, the CH/HW system is a Y...
Replies
47
Views
5K
Hi. I have an Ideal ICOS boiler in my house for HW and CH. It has been working fine but I have noticed that upstarts in my immersion heater cupboard that it has been a little noisy and hear water running, haven't really noticed it before. Anyway, last few days I have noticed some bangs coming...
Replies
7
Views
2K
P
  • Locked
Hi I have a strange fault with my boiler and I can't figure out what is going on... I have a Potterton Suprima 80 HE approx 6 years old and I haven't had any major issue until now. Two days ago it stopped working, the indicator lights were all off. Previously when this boiler had the...
Replies
3
Views
3K
Dotty
D
D
  • Locked
I have a Potterton Profile 100e boiler that has started giving trouble. It's a fully pumped system. We went on holiday for 3 weeks, so I turned the boiler thermostat down low and set the programmer for one hour a day, just to keep it ticking over. When we got back, I reset the programmer and...
Replies
3
Views
1K
Rickster123
R
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock