Search the forum,

Greenstar 24i junior

Discuss Greenstar 24i junior in the Plumbing Jobs | The Job-board area at PlumbersForums.net

C

Christopher Powell

Gas Engineer
Messages
40
Hi all can someone help me out. How exactly do I check the resistance on the solenoids of the gas valve I can't get my multimeter anywhere near the connections

Thanks in advance
 
Worcester used to do a test card for this purpose (pub end testing)

If the solenoids are at the back it’s probably the old style valve!
 
I’d connect up my u-gauge to the gas inlet, if the pressure doesn’t drop on ignition (when power applied to gas valve) then it’ll be the valve!

Sometimes you’ll see cracks on the solenoids, this can be a sign it’s given up! You’ll need a torch & flexi mirror...
 
gassafe said:
I’d connect up my u-gauge to the gas inlet, if the pressure doesn’t drop on ignition (when power applied to gas valve) then it’ll be the valve!

Sometimes you’ll see cracks on the solenoids, this can be a sign it’s given up! You’ll need a torch & flexi mirror...
Click to expand...
Changed valve problem solved. You were spot on, cracks on both solenoids

IMG_20190209_175847.jpg
 

Reply to Greenstar 24i junior in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
233
oz-plumber
O
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
174
exedon2
exedon2
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
181
Last Plumber
Last Plumber
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Firefox
F
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
1
Views
70
MASSO
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock