Search the forum,

Glowworm Energy Store 35

Discuss Glowworm Energy Store 35 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

KingDoey

KingDoey

Plumbers Arms member
Plumber
Gas Engineer
Messages
288
1C863A34-014E-48FD-920D-8628F4C8E71B.jpeg
Hi all

Am fitting one of these next week. Made a start Friday and hung it on wall.

In the box you get a TMV blending valve and a Caleffi branded combi bloc for the unvented side of things.

The book tells you nothing!

I have sussed it I think but just have one question. The combi bloc has a 15mm connection I am not sure what for? I have fitted loads of these in the past but have never had the extra 15mm connection?

Any ideas?

Cheers
 
Use it for what you want it’s balanced so anything
 
I’ve got the old ultracom store it’s a great little boiler

Problems

Weight and size
 
ShaunCorbs said:
I’ve got the old ultracom store it’s a great little boiler

Problems

Weight and size
Click to expand...

First impressions were the PRV on top of the boiler is in a stupid place. It gets in way of flue! Clear design flaw. Had to angle the flue ever so alightly to get it out!
 
KingDoey said:
First impressions were the PRV on top of the boiler is in a stupid place. It gets in way of flue! Clear design flaw. Had to angle the flue ever so alightly to get it out!
Click to expand...

Mine goes out to the left so no issue for me but will have a look
 

Reply to Glowworm Energy Store 35 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I
Thermal Store Heating Up Cold Feed Pipe
Hello, I have just installed a vented McDonald 250L thermal store, it is for multi fuel but currently just connected to a standard oil boiler in the garage which is fully pumped to the TS, the system has two pumps both basic 3speed Grunfoss, one on the boiler return and the other on the CH flow...
Replies
22
Views
1K
John.g
J
E
wall hung toilet pan poor flushing question
A few years ago I installed a wall hung toilet pan in my last house which did not flush well when disposing of waste solids. The water would rise up to the rim then dissipate and usually required further flushing to complete the disposal. I don't recall the brand but the wall mounting frame was...
Replies
3
Views
343
Ben-gee
B
C
Solenoid valve and pressure valve
Hi all. I hope one of you may have the answer i am looking for. I have four solenoid valves connected to the main water supply and they break all the time. I too have them istalled based the manufacturer requirments but i believ the water pressure is too high and they don't last long. I was...
Replies
0
Views
243
Christos83
C
R
Undersink water heater connections - flexible hose SOV's
Hi all! I'm in the process of fitting a replacement undersink water heater in my shed and, as advised in the instructions (yes, I know, what am I doing reading those!), it reccommends connecting to the inlet and outlet using SS braided flexible hoses. Nothing wrong there me thinks. I dropped...
Replies
2
Views
331
rwd 3m
R
B
Santon Unvented Direct PP120E - Help Please
Hi everyone, I have a Santon Premier Plus PP120E (unvented direct immersion heater) fitted with two thermostats, which provides hot water to taps and shower. The central heating runs from a separate system. On the PP120E: Bottom thermostat is set it to 4 out of 5 (approx. 60C), and connected...
Replies
0
Views
388
Bridog
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock