Search the forum,

Buckinghamshire Area - Shower Re-Fit

Discuss Buckinghamshire Area - Shower Re-Fit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

T

TimTim

Messages
4
DSC_0179.JPG DSC_0179.JPG DSC_0178.JPG
Hi. I have a shower that is leaking through the ceiling when in use. I believe it's just the sealant/grout that is defective, but want the base uplifted and the plumbing underneath double-checked just in case. Then need shower base re-fitted and would like new sealant and grout in shower cubicle.

I have had a couple of quotes already from MyBuilder website and they seem a bit steep!

I also have a couple of other bathroom-related jobs that aren't as urgent but I want doing - if the price is right and I find a good tradesman.

Aylesbury area. Cash price preferred ;)

Cheers!
 
Last edited:
How much have they quoted ?
 
I can tell you already it's not a cheap job.

If sealant and grout has gone then it depends on damage to the structures behind.

It will probably open up a real can of worms.
 

Reply to Buckinghamshire Area - Shower Re-Fit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

fango7
Leak under shower along wall and ceiling
Hi all, I have a couple of leaks coming under shower tray downstairs. One is along the wall so think might be joint between wall and tray and the other seems to be near waste tray, there is a slight hairline crack in shower tray near waste . This happens when I leave the shower head near the...
Replies
0
Views
246
fango7
fango7
R
How long to install shower pump? Reality check required, please.
Hi. I'm currently estimating on installing a new shower pump to feed an existing bath/shower diverter. Hot side: fit flange and spherical valve and Y strainer to old cylinder, reduce to 15 mm and to pump flexi and reconnect existing hot distributing pipe. Repair shelf in AC and fit twin...
Replies
29
Views
5K
Timmy D
T
L
Fitting shower base help
I’m about to install a shower base onto a wooden platform that sits about 4 inches high so as to allow the trap to sit under. The instructions calls for 8mm of soft cement to be laid for the base to go onto. I’m concerned on a number of issues including:- The U space cavity the shower base...
Replies
2
Views
720
Ben-gee
B
J
Re-usuable or not? Pushfit fittings
I want to replace two of the flexible hoses that feed the shower mixer valve. I don't like how they have been bent at a right angle. All the fitting in our bathroom are these pushfit fittings. I don't know the brand. Fortunately, I have removed some sections of pipework in the bathroom and kept...
Replies
13
Views
1K
king of pipes
king of pipes
J
Shower tray sealing tapes
Hi. I have have purchased 3 Mermaid wall panels to replace the tiles in our shower. These panels are 3mm in thickness. After removing the existing wall tiles, I have discovered that there is a gap around the entire shower tray, in some places the gap is greater than 3mm, the thickness of the...
2
Replies
44
Views
4K
king of pipes
king of pipes
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock