Search the forum,

Discuss Frost thermostat problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
25
Sorry, this is a slightly unconventional question...
I have two wall-mounted Calorex dehumidifiers in my garage/workshop. These have fan heaters (2kw, I believe) built-in to them. The idea is to stop the dehumidifiers from freezing up. They were supplied with very cheap 2-wire thermostats with dials reading from 0-30˚C, which would turn the heaters on at around 7-8˚C no matter how low I turned the dials. This ran up a stupid electricity bill over last winter, so I replaced the stats with Corgi frost thermostats, supposedly rated at -5 - 10˚C, which I hoped I could set low enough to set the heaters to come on at 3-4˚C. No such luck - one won't come on at all, and the other comes on at 8˚C no matter where the dial is set.
Question - is there such a thing as a decent quality 2-wire no-volt thermostat that could reliably be set to power up these heaters at around 3-4˚C? These things have only cost around a tenner so I expect to need to pay more. I am no expert, as I'm sure you can tell, so advice would be very welcome.
Roger
 
Thanks - I always wonder about control devices that cost under a tenner. I'll have a look at Honeywell, it'll save me a lot more than the cost of a couple of thermostats and maybe stop 'management' complaining about the electricity bills.
 
Thanks - I always wonder about control devices that cost under a tenner. I'll have a look at Honeywell, it'll save me a lot more than the cost of a couple of thermostats and maybe stop 'management' complaining about the electricity bills.
The average home has over 10 honeywell products in it, in a building you are never more than 3m from a Hwell product, every turbo in every vehicle is fitted with a honeywell one ..under license. This is why I use them and incorporate them into my designs ...great quality
Rob Foster ....centralheatking
 
Hmm. I don't seem to be able to find a Honeywell frost thermostat for a no-volt system. The Calorex units require no-volt switching and 2 wire connections. There's not much choice for this spec, I'm finding. Anybody got any ideas?
 
The average home has over 10 honeywell products in it, in a building you are never more than 3m from a Hwell product, every turbo in every vehicle is fitted with a honeywell one ..under license. This is why I use them and incorporate them into my designs ...great quality
Rob Foster ..centralheatking
Any chance of posting the proof to these facts Rob?
 
Hmm. I don't seem to be able to find a Honeywell frost thermostat for a no-volt system. The Calorex units require no-volt switching and 2 wire connections. There's not much choice for this spec, I'm finding. Anybody got any ideas?

Use a 240VAC relay! Use the stat to power the coil of a 240V relay and then use the relay contacts as they are no volt. Simples! ;):cool:
 

Reply to Frost thermostat problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
216
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
215
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
201
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock