Search the forum,

Discuss Identity help . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
Can any of you folks identify the cylinder/immersion heater in the pics please there no manufacture on the cylinder at all

IMG_8891.PNG


IMG_8892.PNG


IMG_8893.PNG


IMG_8894.PNG


IMG_8895.PNG
 
Okay. Then basically any immersion element of the correct length with the correct boss size (looks like 1.5inch) will do.
Just make sure it has NO copper bits like pockets as they corrode much faster than the incalloy parts.
One should NOT use std immersions on a stainless cylinder.
HTH ;)
 
I was going to recommend contacting The Electric Water Heating company at Harlow I think they only do Internet now they used to have a store in East Ham E13 and were always a great source of info ....glad you got it sorted......regards Turnpin:)
 

Reply to Identity help . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock