Search the forum,

Valliant 631 37kw heat only f62 intermittent fault

Post new thread

Discuss Valliant 631 37kw heat only f62 intermittent fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

king of pipes

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
Digital Temperature read out jumping about a bit my diagnosis is PCB on it's way out any one had this . Kop
 
Sorted chaps cheers. kop

20190110_135332.jpg
 

Reply to Valliant 631 37kw heat only f62 intermittent fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Outer flow limited, unknown problem to solve
Hello, recently our boiler stopped working properly, causing a lack of heat in our 14-radiator splitter in 3 storeys. having only one boiler at time it kind of working, only for one at time (and partially hot), depending on the priority in the system. We contacted Valliant for assistance...
Replies
4
Views
387
cily35
C
E
Intermittent fault on Y plan
Customer complains of Intermittent heating on Y plan with Stat satisfied. New boiler fitted last year (no permanent live required or fitted previously) on an existing Y plan system. Existing timer was a Randall 103 (no hot water off position as its a timer not a programmer). The customer wanted...
Replies
25
Views
2K
John.g
J
liopik
Vaillant no power. Switches on for few seconds only.
Hi everyone, I'm hoping to get some advice on an issue I'm having with my Vaillant Ecotec Pro 24 boiler (R1 PCB). It was installed in 2013 and has worked perfectly up until this week. When the boiler does start, it runs for a few seconds, makes some noises, and then shuts down again. I've...
Replies
0
Views
157
liopik
liopik
Ambienz
URGENT Valliant Boiler - pls help troubleshoot
Hi, Have a Valliant Ecotec Plus 637 system boiler that is showing no error codes and S.0 (no demand for heat), but it is not heating. Have checked that it is receiving switched 240V heat demand from controller into PCB, so believe it's just a boiler issue. Boiler was working fine up until...
Replies
13
Views
1K
Jerry
J
B
New boiler overheated
I must be cursed The new boiler that was fitted yesterday had a problem on commissioning, when the central heating was turned on the boiler fired but the pipework was only getting hot up to a certain point, it took the plumber a couple of hours to figure out what was happening, the problem was...
Replies
3
Views
396
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock