Search the forum,

** Heatline Monza 28 expansion vessel **

Discuss ** Heatline Monza 28 expansion vessel ** in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bAli

Messages
5
I had a Heatline Moza 28 boiler fitted around five years ago. It had some pressure issue from very first year. I used to top it up manually.

Then last year, it stopped working altogether and boiler engineer had to pump up its expansion vessel. my boiler worked fine for whole year.

Now it am facing very same issue with more extreme. I have to top up water manually twice a day and boiler keep loosing pressure every time.

My boiler engineer is busy, he can come to my house for next couple of month. I am willing to pump up air into expansion vessel myself but
I have looked but I could not find how to open the top lid of the boiler.


** I will appreciate if you can help me to open the top casing of the boiler.
** Can someone tell me why my expansion vessel keeps loosing pressure?


I have looked everywhere, I could NOT spot any water leakage anywhere in the house....

WhatsApp Image 2018-01-21 at 8.20.34 PM.jpeg
 
Your probs in the wrong port on the fga
 
Yes you need a gas engineer to remove the cover legally
 
Id bet the expansion vessel is too small for the system and you should have a bigger one installed separately on the heating system... not why the picture of the fga has anything to do with it
 
Jones82 said:
Id bet the expansion vessel is too small for the system and you should have a bigger one installed separately on the heating system... not why the picture of the fga has anything to do with it
Click to expand...


It was to show make and model and proof that this boiler was recently serviced and similar "disease" / symptoms.
 
Either way you can’t do anything
 
I have got altogether 6 radiators attached with this boiler. I think its expansion vessel should be designed with proportion to its size. And I think 6 radiators are NOT much of burden for this size of boiler.

I refurbished my property around 4/5 years ago and I full new system installed, including new pipes, radiators and combi boiler.

I have also got TF1 Omega Filter and Nest Thermostat installed with this boiler. I think if they should effect with its functionality.


** What you guy think is the main issue

** What is the solution for it?

Thanks for you expert opinions

WhatsApp Image 2017-09-10 at 8.55.47 PM.jpeg
 
Status
Not open for further replies.

Reply to ** Heatline Monza 28 expansion vessel ** in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
101
fowlerboi
F
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
98
Lou
Lou
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
216
oz-plumber
O
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
207
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
81
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock